|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $153.00
Manufacturer: Slope Meter, Inc.
Brand: Slope Meter, Inc.
Manufacturer: Slope Meter, Inc.
Brand: Slope Meter, Inc.
Used to determine "percent of grade" and is calibrated to read from .00 to .12 (0-12%). The "No. 2NS" aids the operator and speeds work on motor graders, asphalt pavers, wheel ditches, tunneling machines, and other equipment where exacting specifications are required. Item is made of aluminum casting.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $153.67 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-850-003-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-850-003-0
|
The Fowler 54-850 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016" on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability, and an ABS (acrylonitrile butadiene styrene) housing protects electronic components against impact and provides electrical insulation. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016" on 0 to 1" micrometersThimble styleFrictionData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micromete...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $154.42 46% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 56C
Manufacturer: Starrett
Brand: Starrett
Model: 56C
56C Small Surface Gage-7"Spindle-2"X1-1/2"Base
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $155.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 3909MAC
Color: Yellow
Manufacturer: Starrett
Brand: Starrett
Model: 3909MAC
Color: Yellow
The Starrett 3909 precise, high quality test indicator offers a full complement of standard features. Indicator includes two contact points, two dovetail clamps, swivel post holder, tool post holder, contact wrench and case.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $156.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: T444.1XRL-4
Manufacturer: Starrett
Brand: Starrett
Model: T444.1XRL-4
T444.1XRL-4 Outside Micrometer .0001" Grad, 0-4" Range, Ratchet Stop, Lock Nut, Carbide Faces. The Starrett T444 Series have heat-insulators on the frame to help reduce temperature-related expansion or contraction. The Vernier scale on the thimble and sleeve is graduated to 0.001", with a satin chrome rust and glare-resistant finish on the thimble. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement.
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $156.59 8% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's NPT Tapered Pipe Ring Gages are used to check tapered external pipe threads. Perfect for inspecting standard pipe and pipe fittings.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $157.00 15% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 500-171-30
Color: Stainless Steel
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 500-171-30
Color: Stainless Steel
|
The Mitutoyo ABSOLUTE 500 series caliper with exclusive AOS sensor technology is a Digimatic caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget†the origin and measure in awkward or difficult locations. This series also utilizes the patented Advanced Onsite Sensor (AOS) offering improved measurement dependability by increasing resistance to harsh workshop conditions. The New electromagnetic inductive (AOS) sensor has improved resistance to environmental conditions such as dirt, oil and water that can cause false readings. This new feature will improve quality control and productivity in your workplace. This digital caliper has LCD readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper also has an LCD, which clearly shows values and increases reading reliability over the other types, and reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of over speed errors. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second. The calipers use the ABSOLUTE electrostatic capacitance linear encoder which helps prevent over speed errors. They measure outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. LCD Resolution is 0.01mm. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. A Digital LCD Data Reading Ho...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $157.09 16% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-275-005-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-275-005-0
|
Fowler 52-275-005-0 Xtra-Range Inside Micrometer, 0.2-2.2" Measuring Range, 0.001" Graduation, +/- 0.0002" Accuracy. Microfine graduations (.001" or .01mm) on a satin chrome finish permit easy reading. With Fowler Inside Micrometer, you are assured of smooth operation and stabilized uniform accuracy. The frame is specially designed to enable the micrometer to provide extremely accurate small internal measurements. Measuring faces are fully hardened, precision ground and microlap finished to assure exceptionally accurate measuring. Ratchet stop thimble assures exact and repetitive readings. Easy zero adjustment on the sleeve. Meets or exceeds Federal accuracy specs. Fowler 522750050 0.2-2.2" inside micrometer comes with a setting ring, a spanner wrench and a case. Fowler 52-275-005 inside micrometer comes with setting ring, a spanner wrench and a case. It also has full 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $157.16 44% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-345-30CAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-345-30CAL
Includes a Mitutoyo Certificate of Calibration that these tools have been calibrated and meet the ISO/IEC 17025 International Standard for testing and calibration laboratories. Ingress Protection certified IP65 for protection against dust and water.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $158.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Color: Yellow
|
The Brown & Sharpe TESA Tesatast series dial test indicator has a yellow face, a 2mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays units in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ba...
|
|