Dimensional Measurement - Page 1352

Manufacturer: Flexbar Brand: Flexbar

Off-the-Post Flexbars. Maximum Rigidity ; Excellent Positioning. The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Precision Engineered. Instruments held by Flexbar do not drift. Instant Positioning - instant Locking. Post Clamp (Clevis) Fits 1/2" Dia. Post. Supports up to 4 lb. Load. Accurate tool and instrument Positioner. Use With: AGD and Test indicators, Sensors, Magnifiers, Optic Probes, Wires for Welding, etc. Flexbar Dimensions: Bottom of Base to Top of 1/2" Dia. Post - 9". Length of Flexbar itself - 10". Cable: 19 strand stainless steel Wire has aircraFt Grade swaged fittings. Patented Drawbar & Locking Knob design Produces incredibly rigid Arm, once locked. Top Mounting Clamp grips All shapes .125" to .510" Dia. Model No. 18047, Flexbar With Mag. Base and Fine adjustment.

Manufacturer: INSIZE Brand: INSIZE Model: 6313-0D709

Setting ring, 709 inch.

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe

This Etalon Micrometer Stand is for micrometers up to 12 in / 300 mm and other measuring instruments.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Declaration of conformity

Manufacturer: INSIZE Brand: INSIZE Model: 2115-10E

Waterproof electronic indicator, 5 inch 12 7mm resolution 0005 inch 0/01mm.

Manufacturer: Grizzly Brand: Grizzly Model: H7855

Our new digital indicator has a resolution of 0.00005" and also has an analog display making it easy to see the direction of motion. Other features include zero reset, absolute with selectable setting, tolerance for +/- readings and a function key, which can be set for minimum or maximum range. And of course, it will change from Inch to millimeters with the push of a button. This unit has a plane back and a 5/16" mounting stem. The range is 0.5". Comes with an extra battery (CR2032, 3 volt) and fitted case.

Manufacturer: INSIZE Brand: INSIZE Model: ISM-ZS30-OB06X

Auxiliary objective, 0.63x.

Brand: VX680 Model: MIS-M268-D80-00

Manufacturer: Starrett Brand: Starrett Model: 234MA-600

Starrett 234MA-600 End Measuring Rod with Insulated Handle and Spherical Ends, 600mm Length. Starrett 234 End Measuring Rods or “standards” are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe TESA Tesatast series dial test indicator has a white face, a 0.0787" stem diameter, and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face is mounted on the top of the indicator at a right angle to the axis, and two universal dovetail mounts can be used for mounting from the front or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanc...