Dimensional Measurement - Page 1359

Manufacturer: INSIZE Brand: INSIZE Model: 3222-24

Tubular inside micrometer, 2-24", graduation 001".

Manufacturer: Meda - Superior Import Brand: Meda - Superior Import

Furnished with two error proof digital counters which can be reset individually anywhere within the range for quick and easy upward and downward reading. The last digit on the counter is 1.0mm. The dial face is graduated in .01mm. • Bottom surface of the base is stainless steel, hardened and ground • With fine-adjusting wheel and lock • Carbide tipped scriber

Manufacturer: Starrett Brand: Starrett Model: 436.1XRL-5

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gages - Type "U" Style A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Features special grooved top and bottom anvils for groove and recess applications. Model No. 11-3009, Flexbar Snap Gage, "U" Style. •Frame No.: 5X •Range: 2 - 2 1/2

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-284GT Color: Yellow

Optional accessories: swivel clamp, holding bar, stem, contact points. Full Set includes Indicator, Knurled Clamp Ring, ø8mm Stem (part number 902804) and ø2mm Carbide Contact Point, as well as ø1mm Carbide Contact Point and ø3mm Carbide Contact Point, ø4mm Stem (part number 190318), 100mm Length Metric Holding Bar (part number 900209) and Swivel Clamp for ø4mm, ø8mm, Dovetail (part number 900321)

Manufacturer: elecall Brand: Elecall

EC781FN Professional Paint Coating Thickness Tester Meter Gauge Sensor Probe: F , No Fe Measuring Range: 0 to 1250 micrometer, 0 to 49.21milsAccuracy:0.1um/0.1milsTolerance (of reading): ±2%+2umItem Size: 166 x68 x 30mm

Manufacturer: Fowler Brand: Fowler Model: X-Series

Includes 6"/150mm Euro-Cal IV Electronic Caliper Xtra-Value 0-22" Electronic Depth Gage 6"/150mm Euro-Cal IV Electronic Caliper Features Reads in inch, metric & fractions Direct inch/metric/fraction conversion Absolute/Incremental Measurement Water resistant to IP54 standards (Fractions in 1/64" increments) Stainless steel frame 4-way measuring Xtra-Value 0-22" Electronic Depth Gage Features Spring-loaded and hold measurement button for ease-of-use Super-large display Travel: 0-1"/25mm Range: 0-22"/550mm Resolution: .0005"/.01mm (Fractions in 1/64" increments) Supplied in shop-hardened case

Manufacturer: Noga Brand: Noga

Now you can choose additional arms for your magnetic base to fit your needs.

Manufacturer: Starrett Brand: Starrett Model: 436.1XRL-3

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gages - Type "U" Style A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Features special grooved top and bottom anvils for groove and recess applications. Model No. 11-3010, Flexbar Snap Gage, "U" Style. •Frame No.: 6 •Range: 2 1/4 - 2 1/2