Dimensional Measurement - Page 136

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4308970

Mahr Federal 801 SGM MarTest 4308970, 0.0001" x ±0.004" Standard Test Indicator, 0-4-0, 1.5" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: Starrett Brand: Starrett Model: 440MZ-75RL

The Starrett 440, 445 Vernier Depth Gauges, Ratchet Stop, Lock Nut, Micrometer Type, Metric, depending on the model, have a measurement range of 0 to 75mm, 0 to 150mm, or 0 to 225mm; a resolution (or smallest graduation interval) of 0.01mm; with + or – 0.002mm of accuracy. The vernier scale enables precise measurements in fine units. These gauges include measuring rods, 3.2mm or 4mm diameter, to cover the intended range. The bases are available in a choice of 63.5mm, 75mm, 100mm, or 150mm long, and all measuring surfaces of these units are hardened, ground, and lapped for durability and accuracy. These gauges have a ring-type knurled lock nut, ratchet, and speeder for stability and to apply uniform pressure and make quick adjustments for precise measurements. These units include a protective case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-412T

Mitutoyo Horizontal Test Indicator Set, Graduations: .0005", Range: .030", Dial Face: 0-15-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, holding bar, Comment: Long point.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 7012-10

The Mitutoyo 7012-10 Magnetic Base indicator holder grips three ways, uses 132 lbs-force of magnetic pull for security, holds 6 mm, 8 mm, and 3/8” diameter rods, and has a push-button on/off switch for one-handed operation. The flexible neck reaches around oddly-shaped workpieces and into tight spaces where solid rods may not fit. The 58 x 55 x 50 mm base grips horizontally, vertically, and upside-down. For use with all Mitutoyo dial and dial test indicators, as well as similar indicators from other manufacturers. Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics. Magnetic bases can assist the user with setting up a workpiece in a milling machine, surface grinder, or other machine tool. The vertical post and rod in a magnetic base connect using swiveling connectors, or snugs. This allows free motion of the arm so that the dial indicator can be moved into position on the workpiece. Many magnetic bases have a V-step, which is a V-shaped notch in the base for holding the base to arbors, shafts, and other cylindrical items. The magnetic base has a circular hole through the center. A round permanent magnet is inserted into this hole, and a handle or button is attached to allow the user to rotate the magnet. Rotating the magnet turns the base on and off as this causes the position of the magnetic field to rotate as well. In the on position, the iron is acting as an extension of the magnet, while in the off position, the magnet is acting as a keeper, preventing the magnetic field from extending through the base. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Central Tools Brand: Central Tools Model: 3M301

This range digital micrometer is simple to use! With the push of a button it allows you to convert into inches / metric. Simply made easier for measuring with the digital display screen.

Manufacturer: Starrett Brand: Starrett Model: 569AXP

The Starrett 569 series tube micrometer has a vertical cylindrical anvil for measuring tubing wall thickness, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. The vernier scale on the thimble and sleeve is graduated to 0.001” and has a satin chrome rust- and glare-resistant finish. The micrometer is made of high-grade tool steel with a black enamel finish for protection and durability. The spindle has a micro-lapped measuring face for accuracy and is carbide-tipped for wear resistance.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 569AXP

The Starrett 569 series tube micrometer has a vertical cylindrical anvil for measuring tubing wall thickness, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. The vernier scale on the thimble and sleeve is graduated to 0.001” and has a satin chrome rust- and glare-resistant finish. The micrometer is made of high-grade tool steel with a black enamel finish for protection and durability. The spindle has a micro-lapped measuring face for accuracy and is carbide-tipped for wear resistance.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: ZFE Brand: ZFE

ZFE 1pc Metric Plug Thread Gage Gauge Size M29X1mm Product Name : Thread Plug Gage Class : 6H Thread Diameter:M29 Thread Pitch : 1mm Material : Steel Color : Black, Silver Tone Package Content : 1 x Thread Plug Gage

Manufacturer: ZFE Brand: ZFE

ZFE 1pc Metric Plug Thread Gage Gauge Size M52X2mm Product Name : Thread Plug Gage Class : 6H Thread Diameter: M52 Thread Pitch : 2mm Material : Steel Color : Black, Silver Tone Package Content : 1 x Thread Plug Gage

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 900581

The Mitutoyo 900581 center master attachment for inch-measuring height gauges supports measurement of center-to-center distance between holes in a workpiece. The attachment replaces the scriber or electronic probe. The 900581 is an accessory for use with a Mitutoyo inch-measuring height gauge, which is used to measure and/or mark vertical distance from the base of the object in fine units. The attachment has a triangle shape, with a point to insert into the hole of a workpiece to accurately measure the vertical distance of the center of the hole from the base of the object. The attachment can be used with hole diameters from 0.04 to 1.5 inches. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.