Dimensional Measurement - Page 1365

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-346-30

Calibrated MIC, Dignamic, 2-3”, IP65.

Manufacturer: Reed Brand: REED Instruments Model: ST-156

The REED Coating Thickness Gauge has dual technology that provides automatic recognition for ferrous (F) and non-ferrous (NF) metal substrates. It has a magnetic induction for ferrous metal substrates and an eddy current measurement for non-ferrous metal substrates. The memory stores 400 readings.

Manufacturer: Fowler Brand: Fowler

Includes case Series No. 52-243 are extension rod type inside micrometers and have the shortest measuring length of their kind. The detachable handle offers the operator convenience and ease when using these small inside micrometers. Lightweight, rigid and well balanced. To achieve optimal accuracy, each set includes a micrometer head and two extensions, detachable handle, wrench and a deluxe fitted case. Fowler recommends that the inside micrometer with a rod be calibrated by a micrometer or ring gage. Features The anvil and spindle are hardened and precision ground. Spindle threads are hardened and ground. Microfine graduations: .001" on a satin chrome finish permit easy reading. Quick easy zero adjustment on the sleeve. Accuracy = .0003"+(.00005" x L"/2) Meets or exceeds Federal accuracy specs.

Manufacturer: Fowler Brand: Fowler

Includes case Series No. 52-243 are extension rod type inside micrometers and have the shortest measuring length of their kind. The detachable handle offers the operator convenience and ease when using these small inside micrometers. Lightweight, rigid and well balanced. To achieve optimal accuracy, each set includes a micrometer head and two extensions, detachable handle, wrench and a deluxe fitted case. Fowler recommends that the inside micrometer with a rod be calibrated by a micrometer or ring gage. Features The anvil and spindle are hardened and precision ground. Spindle threads are hardened and ground. Microfine graduations: .001" on a satin chrome finish permit easy reading. Quick easy zero adjustment on the sleeve. Accuracy = .0003"+(.00005" x L"/2) Meets or exceeds Federal accuracy specs.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: PLX521012

Mitutoyo - 1" Digimatic Micrometerno Spc Output, Sold As 1 Each

Manufacturer: Flexbar Brand: Flexbar

Calibrated Belt Standing Comparator for MicroinchTM Comparator Plates. Comparator Plates feature: surface roughness (texture) comparison standards made of solid electroformed nickel. The largest variety of standards available for assessing and specifying by Symbol, the Degree of Roughness of machined parts- including every machining method known.

Manufacturer: INSIZE Brand: INSIZE Model: 3232-5

Blade micrometer, 4-5", graduation 0001".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 123-128

The Mitutoyo 123 series disk micrometer has disc-shaped measuring faces with flanges for measuring the pitch of gear teeth, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The diameter of the measuring discs is 20mm. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 220MXRL-25

The Starrett 220XRL series Mul-T-Anvil micrometer uses interchangeable anvils to support varied measurement needs, and includes a flat and rod anvil. It has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.01mm. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle is micro-lapped for accuracy and carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-796B

The Mitutoyo 543-796B Absolute Digimatic electronic indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.00012". The LCD displays in both inches and metric units. This model has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for accurate measurements. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. This model is Ingress Protection certified IP53 for protection against dust and spraying water.Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.01mm)Accuracy+ or - 0.00012"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with flat backData outputYesDimensions103.9 x 59 x 27.5mm (H x W x D)Shipping weight0.5lb.StandardsIP53Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in m...