|
|
-
3.6 of 5.0 with 30 Reviews
SALE PRICE: $431.10
Manufacturer: INSIZE
Brand: INSIZE
Model: 3227-E035
Manufacturer: INSIZE
Brand: INSIZE
Model: 3227-E035
Three points internal micrometer, 275- 35 inch graduation 0001 inch.
-
3.6 of 5.0 with 34 Reviews
SALE PRICE: $439.15 1% OFF
Manufacturer: PRECISION BRAND
Brand: Precision Brand
Manufacturer: PRECISION BRAND
Brand: Precision Brand
Made of hardened tempered quality steel. Material ground and polished to precision tolerances. Rounded ends.
-
3.6 of 5.0 with 14 Reviews
SALE PRICE: $448.84 2% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
Tubular Inside Micrometer, Range 1 1/2 to 8 In./mm, Resolutions 0.001 In./mm, None Thimble, Movement of Screw 1/2 In., Number of Measuring Rods 5, Number of Gauges None, Rod Dia. 3/8 In., Rod Type Tubular Inside MicrometersAs a 2 point contact tool, use for measuring taper, out of round, bell mouth, and barrel. Positive-locking nut. Coiled, spring-pressure, contact-type rods are marked with appropriate lengths. Include adjustment wrenches and storage case.
-
3.6 of 5.0 with 28 Reviews
SALE PRICE: $450.00
Manufacturer: Starrett
Brand: Starrett
Model: 687-3Z
Manufacturer: Starrett
Brand: Starrett
Model: 687-3Z
Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.
-
3.6 of 5.0 with 35 Reviews
SALE PRICE: $464.93 5% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
The Brown & Sharpe TESA IMICRO Capa LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm). An electrostatic capacitance linear encoder helps ensure repeatable, precise measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, fo...
-
3.6 of 5.0 with 3 Reviews
SALE PRICE: $465.80 6% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Self-centring and self-aligning internal micrometers. The high-precision thread machined into the measuring cone, combined with the measuring bolts specially arranged to provide 3-line contact, make them the only micrometers in the world that respect the ABBE principle. Measure depth, reliably.
-
3.6 of 5.0 with 8 Reviews
SALE PRICE: $481.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
The Brown & Sharpe TESA 05790091 Veribor Bore Gauge has a range of 1.37 to 2.36" and is accurate to + or - 0.002 mm. It uses a two-point contact to detect form and shape deviations on bores and holes. The low-clearance circular articulation offers high repeatability of measurements. A centering shoe helps to correctly align the gauge into the bore, while hardened steel ball measuring tips offer high wear resistance. The shaft design helps to prevent user hand warmth from affecting the measured result. Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.What's in the Box?Brown & Sharpe bore gauge (dial sold separately)Inspection certificateFitted wooden case
-
3.6 of 5.0 with 19 Reviews
SALE PRICE: $488.25 1% OFF
Manufacturer: MARS
Brand: Mars
Model: MARS2535
Manufacturer: MARS
Brand: Mars
Model: MARS2535
Features- Coincidence focusing system 15 x eyepieces One position instrument. Measure both meridians without changing optical system Simple vertical adjustable head to fit patient Astigmatic axis 0 to 180 degree Dual eye level sighting system Dioptre 36 - 52 (in 0.25 steps Paint finish : black or white The achromatic optical systems to precise measurement of the corneal radius curvature and accurate measurement of radius curvature of contact lens Standard accessories Dust cover One spare bulb
-
3.6 of 5.0 with 47 Reviews
SALE PRICE: $488.25 1% OFF
Manufacturer: MARS
Brand: Mars
Model: MARS2402
Manufacturer: MARS
Brand: Mars
Model: MARS2402
Features- Coincidence focusing system 15 x eyepieces One position instrument. Measure both meridians without changing optical system Simple vertical adjustable head to fit patient Astigmatic axis 0 to 180 degree Dual eye level sighting system Dioptre 36 - 52 (in 0.25 steps Paint finish : black or white The achromatic optical systems to precise measurement of the corneal radius curvature and accurate measurement of radius curvature of contact lens Standard accessories Dust cover One spare bulb
-
3.6 of 5.0 with 42 Reviews
SALE PRICE: $490.00 1% OFF
Manufacturer: Thomas Scientific
Brand: Mitutoyo
Model: 264-504-5A
Manufacturer: Thomas Scientific
Brand: Mitutoyo
Model: 264-504-5A
This printer offers excellent functionality. You can use it not only to print measurement data, perform a variety of statistical analyses, and draw a histogram or D chart but also to perform complicated operations for X-R control chart.
Viewing Page 1371 of 1520
|
|