Dimensional Measurement - Page 139

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 137-211

The Mitutoyo 137 series tubular vernier inside micrometer includes a set of extension rods with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 0.5” per revolution that helps provide fine positioning. The solid extension rods help provide durability. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Yellow

The Brown & Sharpe TESA Tesatast series dial test indicator has a yellow face, a 2mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays units in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ba...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-153

The Mitutoyo 201 series dial snap gauge is sized in inch units for Go/No Go (Go/NG) inspection of diameters of cylinders and shafts, to verify the workpiece is within tolerance limits. It can be fitted with a dial indicator that has a 3/8” stem diameter to measure deviation from a preset minimum tolerance (sold separately). The anvils of the snap gauge are made of carbide to help resist wear, and their front edges are chamfered to ease insertion of a workpiece between them for inspection. One anvil can be repositioned by turns of a knurled spindle up to 1” of positioning range, and a knurled, nut-type spindle lock provides secure locking of the measurement position. The fixed anvil has a retraction stroke to 0.078”. Snap gauges, also called gages, are precision measuring instruments used to verify that the dimension of a workpiece matches or falls within predefined tolerances. The instrument provides quick limit, also called Go/No Go (Go/NG), inspection by testing the fit of a workpiece to pass between an adjustable opening between anvils. A snap gauge may include a dial or electronic indicator to measure the deviation from the preset dimension. Snap gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-245

The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm for outside diameter (OD) measurement, and a ratchet thimble mechanism that helps provide precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. On some models, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963,...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 295-253

Mitutoyo Digit Outside Micrometer, Range: 0 - 1", Graduations: .0001", Thimble: Ratchet, Standard: No, Comment: Spherical Anvil and Spindle

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-140-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-443-06 Color: Black

The Mitutoyo 513 series dial test indicator has a tilted face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 0.079" carbide contact point, a 3/8" diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a white or black face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very simi...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 129-111

The Mitutoyo Series 129 Vernier Depth Gauge, Interchangeable Rods, Micrometer Type, Metric, depending on the model, have a measurement range of 0 to 50mm, 0 to 100mm, or 0 to 150mm, and a resolution (or smallest graduation interval) of 0.01mm. (See the product catalog for information on accuracy.) The vernier scale provides precise measurements. These gauges include interchangeable 4mm diameter measuring rods (2, 4, or 6 rods included, depending on the measurement range) for flexibility in measuring range. The units have a ratchet stop for uniform pressure and a measuring rod clamp for stability. They have a satin chrome finish on the body for readability and the bases are made of hardened steel for durability and accuracy. They come in a fitted plastic case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 102-324

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a heat-insulated frame to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-143-10

The Mitutoyo 103 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.