Dimensional Measurement - Page 140

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 06ADV380A

Mitutoyo Input Tool, Use for: 05CZA624 and 05CZA625 style cables, Cable Length: 2m, Convert: Mitutoyo SPC to USB 2 input

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-722-0

The Fowler External Electronic Caliper Gage measures outside dimensions (OD) with 0.0008"/0.02mm accuracy and 0.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures OD for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit has absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. This caliper can output data via direct RS-232 for capturing and recording data. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thickn...

Manufacturer: iGaging Brand: iGaging

iGaging 2-3" Digital Quick Micrometer Absolute Origin SpeedMic Snap Lever Action GageiGaging Absolute Origin SpeedMic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position.Quickly measure with super high precisionLever activated - Fully Opens and Closes In Less Than One Second! linear moving sensor provides accurate and reliable measurementsIP65 coolant proofMeasuring Range: 2-3"/50-75mm Carbide tipped spindle Resolution: 0.00005"/0.001mmAccuracy: ±0.00015"/0.003mmFixed Thimble. SPC/USB data output available (not included) Search Amazon for item: B00INL0BA2. Ball Attachment Included. Case included 2 Years warranty

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 123-125

Mitutoyo Disk Micrometer, Range: 0 - 1", Graduations: .001", Thimble: Ratchet, Standard: No, Disk Size:.787" diameter, Disk Material: Hardened steel, Comment: Rotating spindle

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 527-111

The Mitutoyo Series 527 Vernier Depth Gauges, with Fine Adjustment, Caliper Type, Inch, depending on the model, have a measurement range from 0 to 6" to 0 to 40", a resolution (or smallest graduation interval) of 0.001", with + or – 0.001 to 0.003" of accuracy. The vernier scale and fine adjustment screw provide precise measurements. These gauges have a fine adjustment screw for taking precise measurements. They are made of hardened steel and the bases of the units and measuring faces are hardened and lapped for durability and accuracy. An optional wider extension base is sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 123-125

Mitutoyo Disk Micrometer, Range: 0 - 1", Graduations: .001", Thimble: Ratchet, Standard: No, Disk Size:.787" diameter, Disk Material: Hardened steel, Comment: Rotating spindle

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-180

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe TESA Compac series lever dial test indicator has a white face, a 4mm stem diameter, and metric measurements. The indicator can make either horizontal or vertical measurements, and the white dial and contrasting black hand help make measurements easy to read. The compact, carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion. The ball-bearing lever system swivels through to 210 degrees. The dial face mounted at the top of the indicator parallel to the axis, and two universal dovetail mounts can be used for mounting from the top or back. Dovetail mounts provide a rigid setup. This indicator is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, includes a serial number, and an inspection report with a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, two 15mm long rigid stems (4mm and 8mm diameter), and inspection report with a declaration of conformity, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and ot...

Manufacturer: Starrett Brand: Starrett Model: 124AZ

STARRETT Solid-Rod Inside Mic

Manufacturer: ZFE Brand: ZFE

ZFE 1pc Metric Plug Thread Gage Gauge Size M48X1.5mm Product Name : Thread Plug Gage Class : 6H Thread Diameter: M48 Thread Pitch : 1.5mm Material : Steel Color : Black, Silver Tone Package Content : 1 x Thread Plug Gage