Dimensional Measurement - Page 1408

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0216

HHIP thread plug gage is made in "x" tolerance. Classes 2B most commonly used for general applications including bolts, nuts, screws and similar fasteners.

Manufacturer: DASHUHUWAI Brand: DASHUHUWAI

Measurement Accuracy :± (3% + 2µm) or ± (3% + 0.1mils)Size :pocket size Quantity: 1pc Color: Blue Material: ABS Voltage: 3V Size:65mmx35mmx15mm(LxWxH) Special Features: can test on Aluminum Item Type: Mechanical Testers Version: New product since November of 2012 Specification: Measuring Range:0.0mm-2.0mm Accuracy ; 2%rdg ± 0.1mm , 2%rdg ± 4mil Note: Accuracy is guaranteed at the operating temperature of 23℃ ± 5℃ and relative humidity of not more than 75%。 Power Supply : 3V Button cell Operating Environment;: Temperature : 0℃ to 40℃ Relative Humidity: ＜80% Temperature: Coefficient: 0.05x(2%rdg ± 0.01mm,or 2%rdg 4mil)/℃ （＜18℃ or ＞28℃） Storage Environment : Temperature: -10℃ to 50℃ Relative Humidity: 80% Car Maker: Audi, Australia Ford, Benz, BMW, Brilliance, Chevrolet, Chevy, Chrysler, Citroen ,Dacia, Dadi, Daewoo ,Daihatsu, Demo, Fiat, Ford, GM, Holden, Honda ,Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubish ,Nissan, Opel, Peugeot, Porsche, Renault, Romeo ,Rover, Saab,Seat,Skoda, Smart, Subaru, Suzuki, Tata, Toyota ,Volvo, VW, Yamaha This tester is designed to not-destructively measure the thickness of non-magnetic coatings (including paint enamel ,plastic ,epoxy, etc) on iron ,steel or Aluminum. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1PC X LCD Paint Thickness Tester

Manufacturer: Igaging Brand: Igaging

0-16" digital depth gauge is made by iGaging. Features: Measuring range of 0-16" using the interchangeable 5 extension rods (5", 4", 3", 2" and 1") Large easy to read digital display Resolution: 0.0005"/0.01 mm, 1/64" Accuracy: 0.001" /1" On/off function Powers off after 5 minutes of non-use Set zero at any point within the overall range of measurement Readout can be set to display in metric, decimal or fractions Can be used as a depth gauge or digital indicator Spring loaded plunger with overall travel of 1"/25 mm 4-48 interchangeable carbide tipped point IP54 dust and moisture resistant Mounting lug on back so can be used as a dial indicator

Manufacturer: HFS Brand: HFS

HFS 0.008" X 0.0001" INCH DIAL TEST INDICATORS

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Browne and Sharpe 599-7753-120 (EDP NA) OFFSET ROD ASSEMBLY

Manufacturer: Woodstock Brand: Shop Fox Model: D4596

This 5 piece Woodworking Caliper Set includes compass, straight dividers, inside calipers, outside calipers, and inside/outside calipers. Perfect for wood turning and general layout work.

Manufacturer: BikeMaster Brand: BikeMaster Color: --

Bikemaster Dual Reading Digital Caliper Hardened Stainless SteelReading 0.01mm and 0.0005Range 0-150mm 0-6

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

Strong magnetic holding power includes "V" area for clamping to round surfaces. On/Off switch, made of hardened and ground components, flexes almost 360 deg., and is rigidly locked into position with a lever. Includes 5" rod having 3 different diameters and a swivel adapter for lug back indicators to accept all AGD dial indicators.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 905694

Applicable gauges: all calipers without absolute encoder height gauge 570-2XX, 192-6XX, 192-67X indicators 575-XXX, 543-6XX, 543-2XX, 543-4XX depth gauges 547-21X, 547-25X, 571-2XX Scale Unit 572-XXX thickness gauges 547-3XX, 547-4XX.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 905694

Applicable gauges: all calipers without absolute encoder height gauge 570-2XX, 192-6XX, 192-67X indicators 575-XXX, 543-6XX, 543-2XX, 543-4XX depth gauges 547-21X, 547-25X, 571-2XX Scale Unit 572-XXX thickness gauges 547-3XX, 547-4XX.