Dimensional Measurement - Page 141

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-345-30

Includes a Mitutoyo Certificate of Calibration that these tools have been calibrated and meet the ISO/IEC 17025 International Standard for testing and calibration laboratories. Ingress Protection certified IP65 for protection against dust and water.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 129-132

Mitutoyo Depth Micrometer, Range: 0 - 6", Graduations: .001", Thimble: Ratchet, Base: 4"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 129-132

Mitutoyo Depth Micrometer, Range: 0 - 6", Graduations: .001", Thimble: Ratchet, Base: 4"

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-229-780-0

The Fowler 52-229-780 micrometer, caliper, and test indicator set includes three Vernier-scale outside micrometers with a combined measuring range of 0 to 3", a white-face dial caliper with a 0 to 6" measuring range, a white-face dial indicator with 1" travel, a magnetic base with a V-shaped base and an 85-lb. pull, and a fitted case. Three Vernier-scale outside micrometers have a 0 to 1", 1 to 2", and 2 to 3" measuring range and a flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" microfine graduation intervals on a satin chrome finish for precise readings. The positive locking nut on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair has a 0.256" diameter hardened, precision-ground, and micro-lapped carbide measuring faces with 0.00003" flatness and 0.0005" parallelism to provide accurate measurements. Friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated frame helps reduce temperature-related expansion or contraction, providing accurate measurements, and protects the operator's hands from heat.The shockproof stainless steel dial caliper has a white face and dial graduations of 0.001" with 0.001" accuracy, and beam-engraved 0.1" graduations, and is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. The caliper measures 0.10" per revolution of the dial. The caliper has shockproof anti-backlash control, a sliding jaw with a lock, and a covered rack. Shockproof anti-backlash control with a heavy-duty spring provides increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. A knurled l...

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 293-341-30

Mitutoyo Digimatic Outside Micrometer 293-341-30, 1-2 In/25.4-50.8mm, .00005 In/0.001mm IP65, No Output, Ratchet Stop, With Standard.

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: STDCSS

Certified Plastic Shims. Simulate a coating over a particular substrate material or shape. Gage performance can be conveniently verified on a regular basis as required by some international test methods. For use with all type 2, electronic coating thickness gages. Protects the probe from damage or premature wear when placed over hot or abrasive surfaces. Can be placed on top of soft or tacky coating films to obtain thickness measurements without the gage probe depressing the coating film. Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy. Each shim is packaged in its own protective plastic pouch. Certificate of calibration showing traceability to NIST is included with each shim or set of shims. Certified and labeled in both metric and imperial units. Accuracy: +/- 2 micrometer (+/- 0.08 mils). Set includes with thickness: 25 micrometer (1 mil) CS1 orange shim; 50 micrometer (2 mils) CS2 red shim; 75 micrometer (3 mils) CS3 green shim; 125 micrometer (5 mils) CS5 blue shim; 250 micrometer (10 mils) CS10 brown shim; 500 micrometer (20 mils) CS20 yellow shim; 1000 micrometer (40 mils) CS40 white shim; 1500 micrometer (60 mils) CS60 black shim.

Manufacturer: Starrett Brand: Starrett Model: 230P

Starrett Micrometer Part # 50932 230P This is the jewel of precision micrometers used by skilled workmen worldwide. The spindle and anvil are sized at .235" (6mm) to reach places most micrometers cannot reach. Headquartered in Athol, MA, in the heart of New England, where manufacturing began and evolved into what it is today, Starrett has a history and reputation so rich and solid that the words quality and Starrett are virtually synonymous. The broad Starrett product line includes precision tools micrometers, calipers, rules, tape measures, levels, electronic gages, dial indicators, gage blocks, granite surface plates, optical measuring projectors, vision systems, vises, M1 lubricant, and precision ground flat stock. Much of the Companys production is concentrated in hand measuring tools and precision instruments that many manufacturing companies, from small machine shops to Fortune 500 firms, buy for the use of their employees.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-463 Color: White

The Mitutoyo 513 series dial test indicator has a white face, a 0.375" stem diameter, and inch measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The horizontal face is parallel to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 0.079" carbide contact point, a 3/8" diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a white face.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measureme...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-213

The Mitutoyo 511-213 Dial Bore Gauge for Small Holes has a measurement range of 0.24 to 4" and is accurate to + or - 0.0002". It is precise to 0.0005". This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points offer extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 196A5Z Color: White

The Starrett 196 series universal dial indicator has a 0 to 0.2" measuring range with 0.001" graduations for precise measurement of the rise or drop in a work piece. It has a 0 to 100 counter with one revolution equivalent to 0.1", and the white-face dial has a scratch-resistant crystal face for ease of reading. The plunger on the back of the dial comes with 1/2", 5/16", and 1/8" diameter contact points. The dial indicator has a 1/4" diameter stainless-steel shank for mounting. Some dial indicator sets include an adapter, a standard letter of certification, and clamp, tool post holder, snug, and hole attachments. The dial indicator is suitable for applications such as quality control for machined parts.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.