Dimensional Measurement - Page 1435

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: S916-C754

Manufacturer: Globe Warehouse Brand: Globe House Products

Crisp, clear, easy-to-read graduation, accurate to 0.0001''. Hardened and ground spindle with carbide anvil ensure durability and accuracy. Comes in a wood padded case with adjustment wrench and calibration standards. Features: Includes 6 Micrometers with measuring ranges: 0 - 1", 1 - 2", 2 - 3", 3 - 4", 4 - 5", 5 - 6" Super Hard Carbide Tipped Complete with calibration standards and wrenches Ratchet handle for precise application of force. Lock nut Powder coated baked finish Fitted wood padded case included Vernier Graduations: 0.0001"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 102-306

The Mitutoyo 102 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame is tapered for measuring narrow slots and tight spaces, has a baked enamel finish for protection and durability, and a heat-insulated frame to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm, depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fowler Brand: Fowler

Large ball probe. One set of reinforced measuring inserts with ball contact for internal measurements.

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

Wide measuring range with interchangeable anvils. High accuracy interchangeable anvils to ensure that reading does not have to be reset when changing anvils. Light weight and high rigidity over 12" range. *Resolution: .0001" *Ratchet stop and lock nut *Carbide measuring faces *Laser engraved graduations *Enamel frame *With standards in a fitted case

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Dial Test Indicator Set Design Pocket Graduations 0.0001 Range 0.010 Range per Revolution 0.010 Dial Reading 0-5-0 Contact Points 0.039, 0.079, 0.118 Dial Size (In.) 1.30 Bearings Jeweled Bezel Adjustable Finish Satin Chrome Features Jeweled Bearings, Glare Free Scratch Resistant Crystal Includes Indicator, 2 Stems, 3 Carbide Points, 2 Holding Bars, Swivel Clamp, Case Compliance & Restrictions Compliance and Restrictions None This listing is for each. Features Jeweled bearings assure higher sensitivity and accuracy Reversible measuring direction Two holding bars are supplied. (Full sets only) Fully adjustable bezel/dial face Contact point is adjustable within 220 Bezel is sealed with on O-ring to keep out water / oil Model513-504TTypePocketWeight (lbs)0.5BrandMitutoyoPackage Length (in.)5Package Width (in.)3Package Height (in.)1Range0.010Graduation0.0001Dial Reading0-5-0

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage. Model CS Type: C (2 Round buttons and Anvil) Frame No. 10 Range: 4 15/16 - 5 5/16

Manufacturer: Flexbar Brand: Flexbar

Flexbar Pin Gage Sets. Available in Plus or Minus Tolerances: .0002" Limit Flexbar Pin Gages, are ideal for accurate Checking of hole Size, location, Gage slots, distance between holes, Setting other Gages, go and no-go Gaging, and more. Every Size Gage hole is clearly marked for Size. Size laser etched on each piece except .011 - .060 Range Sets. Gages fully Hardened to 60-62 RC, Centerless lapped to 10 Millionths AA Micro-Finish or better. Each Gage Checked against master Gages traceable to the National Bureau of Standards. Gages are Cylindrical, 2" in length and have no sharp corners. Accurate to .0002". Model No. 17745, Pin Gage Set, Range:011-.060 Minus, 50 piece Set.

Manufacturer: Flexbar Brand: RSC

Flexbar Pin Gage Sets. Available in Plus or Minus Tolerances: .0002" Limit Flexbar Pin Gages, are ideal for accurate Checking of hole Size, location, Gage slots, distance between holes, Setting other Gages, go and no-go Gaging, and more. Every Size Gage hole is clearly marked for Size. Size laser etched on each piece except .011 - .060 Range Sets. Gages fully Hardened to 60-62 RC, Centerless lapped to 10 Millionths AA Micro-Finish or better. Each Gage Checked against master Gages traceable to the National Bureau of Standards. Gages are Cylindrical, 2" in length and have no sharp corners. Accurate to .0002". Model No. 17727, Pin Gage Set, Range:011-.060, 50 piece Set.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 571-200MOT-10

The Mitutoyo Series 571, 700 Tire Tread LCD Depth Gauges, Inch/Metric, depending on the model, has a range of 0 to 1" (0 to 25.4mm), a resolution (or smallest graduation interval) of either 0.0005" (0.01mm) with + or 0.0005" of accuracy, or 0.001" (0.1mm) with + or - 0.008" of accuracy. The LCD interface displays in both inches and metric. The gauges in this series are designed specifically to measure tire tread groove depth. The 571 models keep track of the origin point, once set, for the life of the battery (about 2 years) for accuracy. The display has origin-set (Series 571-only), zero, and SPC data output (Series 571-only) functions for the users' convenience. The gauges in Series 700 are made of plastic so that they are lightweight to use. The gauges conform to European Conformity (CE) marking.. The gauges in this series include an SR44 battery. Optional SPC cables and an LCD with data hold are sold separately for Series 571 models. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.