Dimensional Measurement - Page 1445

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 511-741

Mitutoyo Dial Bore Gage 511-741, .7-1.4 In with2922SB dial indicator, 0.0005 In graduation, stem 3/8 In diam.

Manufacturer: GAL Gage Brand: Gal Gage Model: Cat # 13

GAL Gage 13 Dial/ Pit Depth Gauge, Wood Case

Manufacturer: Checkline Brand: Checkline

Materials used: steels, aluminum, glass, thin plastics. Range in steel: 3/16" (0.40" - 2.0"), 1/4" (0.40"- 6.0" & .025 - 6.0"). Wearface diameter: 3/8", 5/8" Crystal diameter: 1/4" or 1/2" 1/4" diameter, 7.5 MHz dual element transducer Potted cable, side in

Manufacturer: INSIZE Brand: INSIZE Model: 2115-251E

Waterproof electronic indicator, 1"/25.4mm, resolution 00005" 0/001mm.

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 2033099

The Mahr 2033099 pencil-style digital transducer has a measurement range of +/- 0.040" (+/- 1.0mm) and is intended for use with Millimess series Maxum III remote indicating units (sold separately). The probe has a 0.375" body diameter and uses replaceable M2.5 thread contact points. This pencil-style digital transducer meets Ingress Protection (IP) 54 standard for protection from dust and water, and is suitable for use in measurement applications such as evaluating a machined surface.Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital display. Dial indicator gauges measure through a spring-loaded plunger driven into its shaft. The pointer on the dial display marks the degree the plunger is depressed, while an additional turn counter may track the number of times the pointer has spun around the dial. For all types of indicator gauges, runout is typically measured when the tip of the plunger (the point) is held perpendicular to the rotating workpiece. Indicator gauges are typically used in manufacturing, machining, and mechanical engineering.Mahr Federal manufactures dimensional metrology instruments and metering systems. The company, founded in 1861, is headquartered in Goettingen, Germany.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-930

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001", with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. This set includes four micrometers in 1" increments (0 to 1", 1 to 2", 2 to 3", 3 to 4"), three standards in 1" increments (1", 2", 3""), one adjustment wrench, and a fitted box.SpecificationsDisplay typeVernier scaleAnvil/spindle styleFlatMeasuring range0 to 4", four piece setGraduation Interval0.001"Face materialCarbide-tippedThimble styleRatchet stopFlatness0.000024"Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.What's in the Box?Mitutoyo 103-177 micrometer, 0 to 1" rangeMitutoyo 103-178 micrometer, 1 to 2" rangeMitutoyo 103-179 micrometer, 2 to 3" rangeMitutoyo 103-180 micrometer, 3 to 4" rangeThree micrometer standards...

Manufacturer: Starrett Brand: Starrett Model: 1015MA

After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. Indicators have jewel bearings and continuous dials. The contact edges are radiused to prevent the work from being marred or deflected. The flat contact area measures 6.3mm in diameter and is 0.125mm thick.

Manufacturer: Fowler Brand: Fowler

Measuring Range 0 ~ 3" Set LCD Resolution 0.00005" Graduation .00005" (0.001mm) Data Output RS232

Manufacturer: Mitutoyo Brand: Mitutoyo

5-30Mm Inside Micrometercaliper Typ

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-571CAL

The calibrated Mitutoyo 543-571CAL Absolute Digimatic digital indicator gauge, ID-N body, is for measuring short, linear distances in harsh workshop conditions. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or – 0.0008". The LCD displays in both inches and metric units, and can be rotated 180 degrees for taking measurements from different directions. The body is 35mm wide and can be used in locations where space is restricted. This model is Ingress Protection certified IP66 for protection against dust and water jets. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. Additional functions include zero set, preset, direction switching, tolerance judgment, hold, and alerts for low voltage, counting value composition error, overflow error, and tolerance limit setting error. This indicator gauge has a measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or – 0.0008"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both i...