Dimensional Measurement - Page 1446

Manufacturer: Starrett Brand: Starrett Model: 684-3Z

These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.

Manufacturer: YPG Gages Brand: YPG Gages Model: U12X

Sound, structurally stable, design and specifications, coupled with a highly experienced, solid manufacturing and quality management system, guarantees YPG Adjustable Limit Snap gages supplied into the USA market are of the highest quality. gages can be 'Set, Sealed and Certified' to pre-determined Go/No Go sizes in YPG's accredited calibration laboratory. A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage. The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel. The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves. Having only two adjustable anvils, the Go/No Go setting procedure is quick and straightforward. The blades are supplied with a standard thickness and depth, both of which can be modified by YPG to meet specific customer application requirements. Radius and chamfer changes can also be modified on request. In addition the 'U' type is very readily used as a more robust replacement for the "Reef" type gage. The Quality Management System operated by YPG is ISO 9001-2000 registered. This certification encompasses the entire organization and confirms the company's management system meets the required standard and in particular confirms the desire to exceed customer expectations and to be continually improving the products and services offered. All gages set at YPG are done in the company's state of the art, A2LA certified metrology laboratory. Product certification can be supplied on any gage calibrated or set in the laboratory. Adjustable Limit Snap Gages are precision gauging devices generally used in a production environment for the rapid, accurate and foolproof inspection of component parts during and after a production. There are certain basic rules which need to be followed to ensure adjustable limit snap gages perform to their expected accuracy and have a long operational life. 6-3/4" - 7-1/4" inch range and 171 - 184mm metric...

Manufacturer: Fluke Brand: Fluke Model: 4359389

Needed to perform 3- and 4-Pole Fall-of-Potential testing (Stake testing). Used with both the Fluke 1623-2 and Fluke 1625-2. Already included in the Fluke 1625-2 Kit.

Manufacturer: Dakota Ultrasonics Brand: Dakota Ultrasonics

The T-101-3300CPZT-S Transducer, 3/16" Diameter, 7.5MHz is a 3/16" 7.5MHz Composite Probe with dual microdot connectors. Top-in with 1 inch extension "snout"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-161

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in metric units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm or 0.005mm depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: P2731-0

Pt2731-0 1.0" .00005"Wi

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-266B

This ID-C Series Digimatic Indicators are exclusively designed for ID measurement.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-287B

The Mitutoyo 543-287B IDC-C112REB Digimatic indicator gauge measures to 0.5” (12.77 mm), has an LCD digital readout with selectable resolution of 0.00001” (0.0002 mm) or 0.05” (1 mm), and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). The gauge is accurate to + or - 0.00012” (0.003 mm), and supports a measuring force of 1.5 newtons or less. The unit runs on, and includes, one SR44 battery. This indicator gauge has an electronic microprocessor that can perform calculations based on spindle displacement and programmable arithmetic coefficients for direct measurement of inside diameter and radius of curvature when used with optional fixtures (sold separately). It can also preset a reference height at any position, set a temporary zero position and return to a true zero reading, switch counting direction, set upper and lower tolerance bounds, and indicate in- or out-of-tolerance (GO/±NG) measurements when bounds are set. The LCD digital readout can display measurements in inches or metric units. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable for SPC (sold separately). An electrostatic capacitance linear encoder helps prevent overspeed errors which help ensure repeatable, precise measurement. The gauge’s stem diameter is 3/8”, with threads conforming to #4-48 UNF of the Unified Thread Standard (UTS). The gauge conforms to the American National Standards Institute/American Gage Design (ANSI/AGD) standard. Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital displ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-101

Recommended dial indicator (optional): 2046SB (0.01mm reading), 2109SB-10 (0.001mm reading); Gauge stem diameter: 8mm; Measuring force: 15N +/- 3N; Parallelism: 5 micrometer or less; Anvil flatness: 0.00004" / 1 micrometer.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe