Dimensional Measurement - Page 1480

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-225-456-0

The Fowler 54-225-456 Absolute electronic depth micrometer has a measurement range of 0 to 6" (0 to 150mm), and a resolution (or smallest graduation interval) of 0.00005" (0.001mm) with +/– 0.00016" (0.004mm) of accuracy. The LCD screen displays in inch/metric and is water resistant to Ingress Protection 54 (IP54) standards. The 4" base is made of hardened steel that is precision ground and micro lapped for durability and accurate measurements. A friction thimble provides consistent measurements. The gauge includes six 0.176" diameter measuring rods and comes a fitted case. This electronic depth micrometer is suitable for precise measurements in a variety of manufacturing, machining, and mechanical engineering applications. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 395-271

The Mitutoyo 395 series outside micrometer has spherical anvil and spindle faces appropriate for measuring the wall thickness of tubing. It also has a ratchet-stop mechanism, an LCD digital readout that displays in metric units with resolution to 0.001mm, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, for protection against penetration by dust, liquids, and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The steel frame has a black, heat-insulated finish, and the thimble and sleeve have a glare-free, satin chrome rust- and glare-resistant finish. The micrometer’s knurled friction thimble and ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment. A lock nut helps ensure quick spindle locking. The unit comes with an SR44 battery and a fitted plastic case. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. T...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-455 Color: White

The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 395-251

The Mitutoyo 395 series outside micrometer has spherical anvil and spindle faces appropriate for measuring the wall thickness of tubing. It also has a ratchet-stop mechanism, an LCD digital readout that displays in metric units with resolution to 0.001mm, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, for protection against penetration by dust, liquids, and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The steel frame has a black, heat-insulated finish, and the thimble and sleeve have a glare-free, satin chrome rust- and glare-resistant finish. The micrometer’s knurled friction thimble and ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment. A lock nut helps ensure quick spindle locking. The unit comes with an SR44 battery and a fitted plastic case. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. T...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-790 Color: White

The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the displ...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-174-212-0

The Fowler 52-174-212 is twin-beam height gauge with a dial gauge, resettable up/down counters, hand-operated feed wheel, a carbide-tipped scriber, a rust-resistant satin chrome finish, a measurement range of 0 to 12" (300mm), and is precise to 0.001" (0.02mm). The dial gauge has distinct, easily read figures for precise measurement. Two separate digit counters register upward and downward travel. Zero setting capability resets to zero at any point for easy reading without special calculations. The gauge is lowered and raised smoothly and evenly on the dual beams by a hand-operated feed wheel with coarse and fine adjustment. Coarse readings are in 0.100" graduations; fine readings are in 0.001" graduations. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability. The satin chrome finish on the scales resists rust and is glare-free. The base is ergonomically shaped for ease of handling and is hardened, ground, and lapped for maximum flatness.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Starrett Brand: Starrett Model: 387-24

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 387 Series has one edge that is both beveled and graduated in 32nds of an inch. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.

Manufacturer: Starrett Brand: Starrett Model: 3250Z-6

The Starrett stainless steel dial height gauge has a measurement range of 0 to 6" (150mm), a fine adjustment thumb roll, a slide lock, a steel scriber, and a hardened stainless steel bar. The dial gauge has distinct, easily read figures for precise measurement. A fine adjustment thumb roll provides precision measurements. A lock holds the slide in position. The included scriber, used to mark position on the workpiece, is steel for hardness and durability, cuts clean, sharp lines with smoothness and less pressure, and can reference zero from the bottom of the base to get the full usable range. The bar is hardened, stainless steel for long life and is back from the edge of the nose for stability. The base is hardened, ground, and lapped with finger grooves for a comfortable handgrip and ease of movement. The gauge can measure depth of holes, slots, and recesses with the PT08680A depth attachment (sold separately). The gauge comes with the scriber and an aluminum case with foam inserts to cushion the instrument.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. What's in the Box?Starrett stainless st...

Manufacturer: YPG Gages Brand: YPG Gages Model: GAPSG

The ideal tool for measuring both flush and gap with one hand. The innovative new design allows the user to zero out both gap and flush simultaneously. Great solution for all manufacturing fit and finish needs. Data transfer to an ASI Datamyte, LMI Data Collector or laptop. Ergonomic handle design for ease of operation. ISO certified by NovaStar Metrology. Includes Adjustable wrist strap, dust and moisture proof case, comprehensive 2 year warranty and 30-day money back guarantee. Gap measuring range: 1.00mm to 25.40mm / 0.0395in. to 1.0000in. Flush measuring range: -6.00mm to +25.40mm / -0.2360in. to 1.0000in. Resolution: 0.01mm / 0.0005in. Accuracy: +- 0.02mm / 0.001in. Repeatability: 0.01mm / 0.0005in.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-765

The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.005mm. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.