Dimensional Measurement - Page 1500

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 527-311-50

The Mitutoyo Series 527 Dial Depth Gauges with Fine Adjustment, Caliper Type, Inch, depending on the model, have a measurement range of either 0 to 6" or 0 to 8", a resolution (or smallest graduation interval) of 0.0015", with + or – 0.001" of accuracy. The dial gauge interface provides precise and easily readable measurements. These gauges are made of hardened stainless steel. The bases of the units are 4" long, and the measuring faces are hardened and lapped for durability and accuracy. The gauges have a fine adjustment screw for taking precise measurements. An optional wider extension base is sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-585-095-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-710-025-0

The Fowler 52-710-025 coaxial indicator has a 1.6" diameter continuous dial, a 0.250" axis offset measuring range, 0.0005" graduations, an accuracy of + or - 0.0002" of true center, and can be used at any angle at speeds up to 800 RPMs for accurate centering and positioning of components in most machining applications. The 0-50 continuous dial remains stationary during spindle rotation and has a total measuring range of 0.250" with 0.0005" graduations. Three internal and three external feelers and a center point feeler have a 1/8" ball diameter and a locating accuracy of + or - 0.0002" of true center. The internal feelers have a measuring capacity of 5/32 to 12". The external feelers have a measuring capacity of 0 to 12". This product has 1 year full warranty offered by Fowler High Precision, an American company. If you experience any problem contact Fowler directly for warranty claims. The set includes a coaxial indicator, three internal feelers, three external indicators, a center point feeler, a restraining arm, and a fitted storage case. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.   Specifications Dial face type and diameter 1.6" diameter face Dial reading and graduations Continuous 0-50 with 0.0005" graduations Measuring range 0.250" axis offset Speed Up to 800 RPMs Internal measuring capacity 5/32 to 12" External measuring capacity 0 to 12" Centering accuracy + or - 0.0002" of true center Feeler ball diameter 1/8"   Test indicator gauges, also called gages, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limit...

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00124028

The Standard Gage outside digital micrometer set includes a set of digital micrometers and standards for zero-setting, and comes with a fitted case for storage. Each micrometer has a mechanical digit counter for precise reading to 0.0001”, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism for uniform pressure during adjustment.The vernier scale on the thimble and sleeve is graduated to 0.0001”, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Flexbar Brand: Flexbar

Granite Quick Check indicator Stand. Features: Ultra-Smooth Rack & Pinion indicator Positioner offers 2" of Vertical Travel. Rapid adjustment for Checking Multiple Height Features on parts. Twin Knobs for left or Right Hand Positioning. Stem Mount indicator Holding Arm accommodates both 3/8" and 8mm Diameter Stems. Granite Base: 8" x 6" x 2" High .00005" flatness. Stainless Steel Column. Column Height: 12". Column Diameter: 9/16". Can be used With any AGD indicator. Model No. 15825, Flexbar Granite Quick Check indicator Stand. Dial indicator is not included-please order separately.

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00124029

The Standard Gage outside digital micrometer set includes a set of digital micrometers and standards for zero-setting, and comes with a fitted case for storage. Each micrometer has a mechanical digit counter for precise reading to 0.0001”, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism for uniform pressure during adjustment.The vernier scale on the thimble and sleeve is graduated to 0.0001”, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 02AZD810D

The U-WAVE system enables easy wireless data communication from a measuring tool to a PC using the Digimatic protocol. Measurement efficiency is improved by eliminating the long and cumbersome data cables. The user friendly interface allows data to be loaded into any software product that accepts keyboard input, such as Excel or Notepad.

Manufacturer: Starrett Brand: Starrett Model: 124B

The Starrett 124B solid-rod inside micrometer set offers a range from 2” to 12” and has figures numbered every 0.001”. The hardened, radius-ground anvils on rods are accurate. Solid-rod inside micrometers are often used for measuring the inside diameter of a cylinder or ring and when measuring parallel surfaces. The micrometer head, rods, and spacing collars are assembled to the desired range and then adjusted to obtain the measurement. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.

Manufacturer: GreatLite Brand: Mayes Model: 10155

The Small Protractor Angle Finder by Mayes detects any angle to 360 degrees and is accurate 1/2 of a degree. The Angle Finder is made of durable, high impact ABS plastic that resists heat and cold and are completely unaffected by magnetic fields. A magnetic base holds the gauge securely in place for easier reading and allows use on a variety of surfaces.

Manufacturer: Bora Brand: Bora Model: 560019

Bora marking gauges, featuring beech construction with metal accents, are designed to accurately mark your material prior to sawing, chiseling, or cutting. The Marking Gauge is a single pin construction with thumbscrew adjustment and radius bottom edge.