Dimensional Measurement - Page 1516

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 155-907U

Mitutoyo Telescoping Gage Set, Range: 5/16" to 2-1/8", Number of Pieces in Set: 5

Manufacturer: Starrett Brand: Starrett Model: 657A

Powerful permanent magnet base holds firmly to steel or iron surfaces-horizontally, vertically or upside-down. Inside: (1) Magnetic base.(3) Contact points.(1) Adapter point.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-563-777-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Flexbar Brand: Flexbar

Indicol Universal Indicator Holder for Milling Machines and Jigborers. Made in U.S.A. Reach from 0-12" Dia. - Larger reach is possible by replacing and using a Longer rod. Guaranteed accurate Readings. Versatility in applications include: Alignment of work -Spindle perpendicularity Checking - Concentricity Reading. Indicator is Not included in prices. Fits All popular indicators With 5/32" shank or Dovetail. Model No. 18131, indicol Clamp 1 7/8" Diameter. (for Bridgeport Mill "J", "2J", Moog, index, Rockmill and Lagun Mills.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-783-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Eliminates trouble in measuring hard-to-get-at places and enables you to make complete use of your Dial Indicator. The set includes 22 points in various shapes and sizes. The set is supplied with a fitted case. Points have AGD Standard #4-48 threads and are protected against corrosion.

Manufacturer: HHIP Brand: HHIP Model: 4400-0014

0-.060" Swiss Style Dial Test Indicator Kit with .0005 Graduation ~ Swiss type horizontal dial test indicator with automatic reversal and jewel LED movement. ~ Dial reading is 0-15-0. ~ Easy to read tit LED dial with a diameter of 1-1/2". ~ 210 degree swivel arc with .080 steel contact point. ~ Axial support. ~ Height gage bar with clamp. ~ Universal Holder. ~ One 5/32 and one 3/8 stem. ~ .04, .08, & .12" 1.4mm thread points. ~ Complete with fitted case.

Manufacturer: Starrett Brand: Starrett Model: 387-18

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 387 Series has one edge that is both beveled and graduated in 32nds of an inch. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-010

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in inch units for making precise inside dimension (ID) measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are hardened steel for durability. The vernier scale is graduated to 0.001”. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: STAKF Brand: Starrett Model: 385-24

These straight edges are precision ground and nicely finished to rigid Starrett standards. They are unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Their thickness and design permit them to retain shape and accuracy, but still be portable and easy to handle. The No. 385 Series are beveled one edge, but not graduated. The No. 385 Series in sizes 36" and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently.