Dimensional Measurement - Page 163

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage three-point vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores and a vernier scale in inch units for making precise measurements. The micrometer includes an extension rod for access to deep bores, and a setting ring. The micrometer and accessories have a satin chrome rust- and glare-resistant finish. The contact faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.0001” or 0.0002” depending on the model. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 137-205

The Mitutoyo 137 series tubular vernier inside micrometer includes a set of extension rods with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in metric units for taking precise ID measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 13mm per revolution that helps provide fine positioning. The solid extension rods help provide durability. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-302 Color: White

The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe style A Intrimik vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise inside dimension (ID) measurements.The micrometer is made of high-grade tool steel for durability, with a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001” or 0.0002”, depending on the model. A knurled friction thimble helps provide quick adjustment capability. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-360 Color: White

The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in standard inch units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-159

The Mitutoyo 201 series dial snap gauge is sized in inch units for Go/No Go (Go/NG) inspection of diameters of cylinders and shafts, to verify the workpiece is within tolerance limits. It can be fitted with a dial indicator that has a 3/8” stem diameter to measure deviation from a preset minimum tolerance (sold separately). The anvils of the snap gauge are made of carbide to help resist wear, and their front edges are chamfered to ease insertion of a workpiece between them for inspection. One anvil can be repositioned by turns of a knurled spindle up to 1” of positioning range, and a knurled, nut-type spindle lock provides secure locking of the measurement position. The fixed anvil has a retraction stroke to 0.078”. Snap gauges, also called gages, are precision measuring instruments used to verify that the dimension of a workpiece matches or falls within predefined tolerances. The instrument provides quick limit, also called Go/No Go (Go/NG), inspection by testing the fit of a workpiece to pass between an adjustable opening between anvils. A snap gauge may include a dial or electronic indicator to measure the deviation from the preset dimension. Snap gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe style A Intrimik vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise inside dimension (ID) measurements.The micrometer is made of high-grade tool steel for durability, with a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001” or 0.0002”, depending on the model. A knurled friction thimble helps provide quick adjustment capability. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-307 Color: White

The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-281-14

The Brown & Sharpe style A Intrimik vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise inside dimension (ID) measurements.The micrometer is made of high-grade tool steel for durability, with a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001” or 0.0002”, depending on the model. A knurled friction thimble helps provide quick adjustment capability. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 690-1Z

Starrett 690-1Z HOLE GAGE- .010-.040