|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $966.94 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 340-351-10
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 340-351-10
|
The Mitutoyo 340 series LCD outside micrometer has a bow-type frame and includes as set of six interchangeable anvils for a diversified range of measurement of large outside dimensions. It also has a ratchet-stop mechanism, an LCD digital readout that converts between inches and metric with resolution to 0.00005†(0.001mm) for outside diameter (OD) measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The frame has a baked enamel finish for protection and durability. A spindle lock helps provide secure locking of the measurement position. The unit comes with an SR44 battery, standards for zero-setting, and a fitted plastic case. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was foun...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $967.28 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-169
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-169
|
The Mitutoyo 468 series Digimatic Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in metric units with resolution to 0.001mm. It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel are TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in ...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $975.00 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-363
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-363
Color: White
|
The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in standard inch units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the...
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $999.00 36% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-181-901
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-181-901
Technical Specification Item Outside Micrometer Set Micrometers Included Mfg No. 599-1-31, 599-2-31, 599-3-31 Range 0-3 Resolution 0.0001 Thimble Type Fricton SPC Output NO Includes Standard, Fitted Case Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $1,075.00 1% OFF
Manufacturer: DeFelsko
Brand: DeFelsko
Manufacturer: DeFelsko
Brand: DeFelsko
The PosiTector 6000 FNS1 Coating Thickness Gauge Standard Model with Separate Probe for Ferrous and Non-ferrous Metal Substrates (0-60 mils/1500 um), complete kit. The FNS1 Positector 6000 Coating Thickness Gauge is a simple and durable precision instrument that uses magnetic and eddy current principles to accurately measure coating thickness on both ferrous and non-ferrous metals. All Positector 6000 Coating Thickness Gauges are supplied complete with precision plastic shims, protective rubber holster with belt clip, 3 AAA batteries, instructions, wrist strap (built-in style only), nylon carrying case with shoulder strap, NIST Traceable Certificate of Calibration, two (2) year warranty.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $1,150.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 337-301
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 337-301
|
The Mitutoyo 337 series Digimatic tubular LCD inside micrometer includes a set of solid extension rods to help provide durability when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in metric units with resolution to 0.001mm, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $1,375.00 1% OFF
Manufacturer: DeFelsko
Brand: DeFelsko
Manufacturer: DeFelsko
Brand: DeFelsko
The Positector 6000 NAS3 Coating Thickness Gauge Advanced Model for Anodized Aluminum (0-25 mils/625 um), complete kit is a simple and durable precision instrument that uses magnetic and eddy current principles to accurately measure coating thickness on both ferrous and non-ferrous metals. All Positector 6000 Coating Thickness Gauges are supplied complete with precision plastic shims, protective rubber holster with belt clip, 3 AAA batteries, instructions, wrist strap (built-in style only), nylon carrying case with shoulder strap, NIST Traceable Certificate of Calibration, two (2) year warranty.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $1,385.00 1% OFF
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: KITF1
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: KITF1
KITF1 comes complete with a standard (1) gage body, ferrous coating thickness probe (6000-F), environmental probe, surface profile probe, precision plastic shims, glass zero plate and metal shim, protective rubber holster with belt clip, wrist strap, 3 AAA alkaline batteries, 3 instruction manuals, hard shell case, protective lens shield, 3 long form certificates of calibration traceable to NIST, USB cable and 2 year warranty on gage body and probes.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $1,950.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 515-590
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 515-590
|
The Mitutoyo 515-590 bore gage zero checker allows zero adjustment of dial bore gages with a range of 18 mm (0.7") through 400 mm (16") using gage blocks (sold separately). It checks zero point for measurement quality assurance. The flatness of the parallel jaws is 0.5 micrometers, and the parallelism of the parallel jaws is 1 micrometer. The set includes a stand, three attachments, and two dedicated jaws. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display it through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, indicating how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 515-590 zero checker stand Three attachments Two dedicated jaws
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $2,135.00 1% OFF
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: KITFN3
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: KITFN3
KITFN3 comes complete with a advanced (3) gage body, ferrous/non-ferrous coating thickness probe (6000-FN), environmental probe, surface profile probe, precision plastic shims, glass zero plate and metal shim, protective rubber holster with belt clip, wrist strap, 3 AAA alkaline batteries, 3 instruction manuals, hard shell case, protective lens shield, 3 long form certificates of calibration traceable to NIST, USB cable and 2 year warranty on gage body and probes.
|
|