Dimensional Measurement - Page 227

Manufacturer: MITUTOYO Brand: Mitutoyo

Series 250 Plain Digit Micrometer Heads, 0 in-1 in, .0001 in, Ratchet Stop Carbide tipped measuring faceratchet Stop for constant forceThe digit counter enables easy reading of spindle movement

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 113-102

The Mitutoyo 113 series limit micrometer has two sets of spindles and anvils for Go/No-Go (GO/NG) inspection of outside dimensions (OD) within tolerance limits. Each spindle and anvil set has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a knurled friction thimbles that help provide quick adjustment capability. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scales on the thimble and sleeve are graduated to 0.01mm, with a satin chrome rust- and glare-resistant finish. The spindles and anvils have flat measuring faces and are carbide-tipped for wear resistance. Spindle locks help provide secure locking of the measurement positions.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Starrett Brand: Starrett Model: 226RL-5

The Starrett 226 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 145-187

The 145 series vernier inside micrometer has caliper-type jaws and a vernier scale in metric units for making precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-404

Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).

Manufacturer: ASIMETO Brand: ASIMETO Model: 207-01-1

Standard, Inside Micrometers, ASIMETO

Manufacturer: Western Instruments Brand: Western Instruments

The Western Instruments N88-4-I Pocket Pit Gauge with Inch Dial Indicator, Dual Edge Blade (Reversible) 1.5" (38mm) Long and Spot Base is a precision instrument that allows the Corrosion Inspector to conveniently measure Pit Depth or material loss in areas of Weight-Loss Corrosion. The N88-4 Pocket Pit Gauge by Western Instruments comes with a reversible dual edge blade with a 1.5 inches (38mm) long side and another spot base. Western Instruments Pit Gauges assure compliance with vessel, pipeline, tank and OCTG specifications for corrosion and erosion depth measurement

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 123-103

The Mitutoyo 123 series disk micrometer has disc-shaped measuring faces with flanges for measuring the pitch of gear teeth, a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The diameter of the measuring discs is 20mm. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 152-389

The Mitutoyo 152 series micrometer head has a large-diameter thimble for fine positioning and ease of reading and either an anti-rotation device on the spindle or a spherical measuring face for use as an XY-stage feed. The vernier scale has graduations in metric units for taking precise measurements, and a white anodized aluminum rust- and glare-resistant finish. Models with an anti-rotation device have bidirectional graduations to 0.005mm, a hardened steel measuring face for durability, and a floating thimble mechanism for adjustable zero-setting to help provide accuracy. Models with a spherical measuring face are graduated to 0.001mm, have a carbide-tipped measuring face for wear resistance, and an adjustable spindle for zero-setting. The micrometer head has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.