Dimensional Measurement - Page 229

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-174-012-0

The Fowler stainless steel vernier height gauge is precise to 0.001" (0.02mm), and has a hand-operated slider, an offset carbide-tipped scriber, and a rust-resistant satin chrome finish. The adjustable main scale has a full 3/4" adjustment range. Zero setting capability resets to zero or any reference figure at any point for easy reading without special calculations. A calibrated screw mechanism supports fine, uniform slider adjustments. A swing-away magnifier plus extra-long vernier scales with wide separations in inch and metric provide exact and precise readings. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability, and offset for direct reading over the full range of travel. The satin chrome finish on the scales resists rust and is glare-free. Raised lands on the main scale surfaces prevent friction wear. The hardened stainless steel beam and slide provides durability. The base and measuring surfaces are constructed of hardened tool steel and are ground and microlapped. The base is ergonomically shaped for ease of handling. The gauge comes with the scriber and a magnifier.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic i...

Manufacturer: Starrett Brand: Starrett Model: 824G

The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001” and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Fowler Brand: Fowler

Fowler Anvils 6pc 50-75mm 52-258-026-0

Manufacturer: INSIZE Brand: INSIZE Model: ISM-M2000-20X

20x eyepiece (view field: 47 inch diameter).

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-223-045

Fowler 52-223 series metric digit micrometer has a choice of measuring range and a flat anvil/spindle pair with a 6.5mm diameter measuring face for general purpose measuring. The digit display has 0.01mm graduation intervals and an accuracy of 0.001mm for precise readings. Micrometers up to 100mm have a secondary Vernier scale with 0.001mm graduation intervals and an accuracy of 0.001mm and microfine graduations on a satin chrome finish to provide clear reading. The positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00076mm flatness and 0.001mm parallelism on 0 to 25mm micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The blue baked-enamel frame provides durability. The insulated steel frame helps reduce temperature-related expansion or contraction providing for accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 50mm and above include a standard. SpecificationsDisplay type Digit with Vernier Anvil/spindle style Flat Measuring range Varies Digit graduation interval 0.01mm Vernier graduation interval 0.001mm (on 0 to 100mm micrometers) Accuracy 0.001mm Thimble style Ratchet stop Anvil/spindle diameter 6.5mm Flatness 0.00076mm Parallelism 0.001mm on 0 to 25mm micrometersMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types ...

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

Graduation: .001" / .01mm Features: • Rigid twin column structure • 6 digit LCD display and minus sign (-) • Large size feed wheel • Lock on measuring slider • Battery furnished • Carbide tipped scriber Functions: • Zero setting, • Inch/mm conversion • Data hold • Plus/minus presetting

Manufacturer: Starrett Brand: Starrett Model: 690-2Z

Starrett 690-2Z HOLE GAGE- .030-.130

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads . True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20318, 3-Point Bore Gage Heads, Head Size 1.023-1.260"

Manufacturer: DeFelsko Brand: DeFelsko

The CMP S1 Coating Thickness Gauges Epoxy Coating on Steel Plates (4) is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: UM-1 Color: Black

Standard package:UM-1thickness gauge Standard probe (PT-08) Carrying case Two 1.5V AA alkaline batteries Operating manual Certification of quality Packaging list Operating principle:Ultrasonic pulse/echo method with dual-element probes Probe zero adjustment: Selectable: 1-point calibration: normal measurement 2-point calibration: curve surface measurement or other special application with a high precision V-path correction:Automatic Measuring range: 0.8mm to 300mm; 0.031in to 11.81in Depending on probe, material and surface condition Digital resolution:0.001in or 0.1mm Units:inch or mm Display:128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm) EL backlight and switchable contract ratio Digit height: 0.54in or 13.75mm Measurement update rate: 4 Hz in standard measurement mode 25 Hz in MIN capture mode Material velocity range: 1000 to 9999 m/s; 0.039 to 0.394 inch/µs Power: Two 1.5V AA alkaline batteries Warning with low battery voltage Operating time: Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode Auto shut-off:After 5 minutes of non-use Operating temperature: -10℃ to +50℃; +14℉ to +122℉ Specification to -20℃/-4℉ on request Size:5.86in×2.87in×1.25in; 149mm×73mm×32mm (H×W×D) Weight: 200g; 7oz (including batteries) Data logger capacity: Up to 500 readings can be divided into a maximum of 5 files (user-selectable)