Dimensional Measurement - Page 231

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 137-217

The Mitutoyo 137 series tubular vernier inside micrometer includes a set of extension rods with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 0.5” per revolution that helps provide fine positioning. The solid extension rods help provide durability, and the measuring faces are carbide-tipped for wear resistance. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Checkline Brand: Checkline

Materials used: cast iron, plastics (polypropylene, polyethylene, etc.),thin fiberglass. Range in steel: 1/4" (.060" - 4.0"), 1/2" (.060" - 5.0"). Wearface diamenter: 3/8" or 5/8". Crystal diameter: 1/4" or 1/2" 1/4" diameter, 2.25 MHz dual element transducer High Temperature (650 °F), potted cable, top in

Manufacturer: Checkline Brand: Checkline

The JZ-50R Wire Diameter Gauge, Measuring Range 0.01-5.00 mm is the ideal tool for measuring wire diameters, tape and cloth/fabric thickness' - without stopping the manufacturing process.

Manufacturer: Mahr Federal Brand: Mahr Federal Model: 2034201 Color: Black/Red

UMaxum II the "classic" amongst all measuring instruments, for over 30 years the Maxum and uMaxum series of digital comparators is synonymous for high precision, extreme robustness and exceptional value. This mew generation of inductive digital comparators offer in addition to being robust and highly precise, comforts such as options for extreme values can be saved from dynamic measurements, both a combined digital and analog display and data can be transferred to evaluation equipment. Since most digital indicators are used in a comparative gage the uMaxum is the perfect match of both application and value. The Mahr Federal uMaxum II Digital Indicator 2034201 provides ±.04" (±1.0mm) measuring range, a .46" long stem with a .375" Stem Diameter.With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB HubsAdvanced Functions: Dynamic mode operation: Max, Min, TIR Two point difference measurement – provides comparison of two readings or measuring locations. - Calculate the distance between 2 measured values Multiplier factor for ratio measurements Hold function – holds reading on display until ready to resume measuring Data output with serial number identification capability Data output with selectable continuous output or single request of reading(s).

Manufacturer: Mahr Federal Brand: Mahr Federal Model: 4337650 Color: Black

Mahr Federal MarCator 1086 R Digital Indicator, with MarConnect has 0 to.5" (0 to 12.5mm) measuring range with selectable resolution to 0.00002" (0.0005mm) for precision results. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB Hubs Simply send your measured data without being caught up between cables directly into Microsoft Office Excel or via a keyboard code into any Windows program. MarCator Digital Indicators with the REFERENCE symbol are equipped with the innovative Reference-System. The zero position just has to be set once: after setting the zero position, the zero remains stored for all further measurements. Therefore, once the caliper is switched ON or the slide is moved the caliper is immediately ready for measurement. The need to reset to zero with a conventional caliper once the caliper is switched on has now become obsolete. Its Large digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. Due to the outstanding IP52 protection against dust and water the Digital Indicator Marcator 1086 R Reference delivers precise and secure results even in the most difficult workshop conditions. The finished plastic components have an excellent outstanding chemical resistance.Digital Indicators are measuring instruments used for measuring small linear distances for the inspection in manufacturing to provide the precise measurements of an object. The electronic digital indicator includes battery.

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: EDI-300P-3

Patented "Channel Lock" design assures precisely parallel anvil surfaces throughout the full 25 mm/1 inch range of adjustment. All Series 300P Snap Gages are fully adjustable with positive position locking at any point within the range.Large 15. 5 mm/. 61 in square tungsten carbide anvils provide flat, parallel, long-lasting working surfaces ensuring precision that lasts.

Manufacturer: PRECISION BRAND Brand: Precision Brand

Made of hardened tempered quality steel. Material ground and polished to precision tolerances. Rounded ends.

Manufacturer: POSITAL-FRABA Brand: POSITAL-FRABA

ACCELENS (Compact Size) Inclinometer CANopen Interface Single Axis 360°

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-864

The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0002”. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: DeFelsko Brand: DeFelsko

The Spare Probe for PosiTector 6000 FT Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.