Dimensional Measurement - Page 282

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: HHIP Brand: HHIP

0-0.20 Inch .001" Vertical Dial Test Indicator (4400-0031) ~ Graduation is 0.001". ~ 0-100 reading. ~ Dial face diameter is 1-1/2". ~ Contact point is .098" X 1.25". ~ Stem is 1/4" X 1.5" . ~ 3 plunge contact including 3/16 X 3/32", 5/16 X 3/32" & 3/16 X 1". ~ Designed for making comparative tests. ~ Supplied in a case.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-591 series telescoping gage is used for measuring the internal diameter of a bore or the width of a groove. A knurled lock retains setting of the measurement arm for sizing with a micrometer or caliper. The satin chrome finish resists rust and is glare-free. It comes assembled with a handle.Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: Precision Brand Brand: Precision Brand

Precision Brand Feeler Gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-248-003-1

The Fowler 52-248 series outside micrometer has a flat anvil/spindle pair with a choice of measuring range and 0.01mm graduations for general purpose measuring. The Vernier scale has 0.01mm graduations and an accuracy of 0.001mm for precise readings and accurate measurements. The anvil/spindle pair has a 6.5mm diameter, 0.00076mm flatness, and 0.000125mm parallelism on the 0 to 25mm micrometer for accurate measurements. Hardened, ground, and micro-lapped measuring faces provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. Friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame provides durability and long life. The micrometer includes a wrench and a fitted case. Micrometers 50mm and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.01mm Accuracy 0.001mm for 0 to 25mm micrometers Thimble style Friction or ratchet Anvil/spindle diameter 6.5mm Flatness 0.00076mm Parallelism 0.000125mmMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. ...

Manufacturer: Starrett Brand: Starrett Model: 272A

The Starrett 272A Inch Reading Fillet or Radius Gauge has 16 leaves to measure 1/32" to 17/64" concave or convex radii in woodworking, metalworking, machining, layout, and pattern-making applications. The 16 shaped leaves measure at any angle and are stamped with the radius size for accurate sizing. It measures concave or convex radii from 1/32" to 17/64" in 1/64" increments. It has an eccentric mounting that provides clearance between the leaf and the case when the gauge is open.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 148-308

The Mitutoyo 148 series large micrometer head has a vernier scale in metric units for taking precise measurements, and a large-diameter thimble for ease of reading. The micrometer head is available with a standard spindle pitch of 13mm, or with a 6.5mm spindle pitch for slow head travel to help provide fine positioning. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is suitable for measurement or use as a stop, and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Grizzly Brand: Grizzly Model: H5686

This great set comes with some of the most important basic measuring tools that you'll need for just about any task Includes: 6" scale with inch and metric measurements and conversion tables on the back, combination angle gauge, scribe with 2 tips, 4" brass caliper that measures inside and outside, hole gauge, straight point divider, square, automatic center punch, threading gauge, drill point gauge and a 3-way thread pitch gauge which will measure whitworth, metric and inch thread pitches. Custom fitted case.

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MW100-20BI

Standard DIN 862 Supplied in storage case Capacity - 0-200mm/0-8inch Resolution - 0.02mm/0.001inc Jaw length - 40mm Moore and Wright HistoryFounded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineers tools.

Manufacturer: Generic Brand: Generic Model: QY-US4-160215-1639

!!!!!----NOTE----!!!!! And if any questions, please contact us first before using A---/to--/-Z or neg-a-t-iv-efee-db-a-c-k or char-g-e-ba-ck or other Ama-zo-n Procedure which will give us lots of troubles Instant, accurate inside & outside measurements in SAE/standard or Metric increments Powered for months by LR44 button battery (incl); just move head for auto-on, turns off automatically Easy-read LCD screen reduces errors; lightweight & strong carbon fiber can't rust, non-magnetic Handy 4-in. size, range 4.25 in./110mm, resolution 0.01"/0.1mm, accuracy +/- 0.01"/0.2mm Converts SAE/Metric & vice-versa, zero-scale function, inside/outside jaws 1.25/.50 in. Weight 2 oz