Dimensional Measurement - Page 285

Manufacturer: Vermont Gage Brand: Vermont Gage

These economical general purpose Vermont pin gages make quick and accurate measurements and can be used to measure hole sizes, calculate distances between holes, gage slot widths and can also be used for Go or No-Go gaging. Packaged with a rust preventative features, these pins maintain an indefinite shelf life.

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of M26 x 1.5 thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: STAKF Brand: Starrett Model: 66T

This Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, Gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Range of leaf thickness from 0.0015", 0.002", 0.0025", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.009", 0.010", 0.011", 0.012", 0.013", 0.014", 0.015", 0.016", 0.017", 0.018", 0.019", 0.020", 0.021", 0.022", 0.023", 0.024", 0.025".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 148-353

The Mitutoyo 148 series large micrometer head has a vernier scale in inch units for taking precise measurements, and a large-diameter thimble for ease of reading. The micrometer head is available with a standard spindle pitch of 0.5”, or with a 0.25” spindle pitch for slow head travel to help provide fine positioning. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is suitable for measurement or use as a stop, and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: CME Brand: CME Tools

0-1" x 0.0001" Multi-Anvil Micrometer, Uni-Mike 0.0001" graduation. Including 2 interchangeable anvils---Flat Anvil and Round Anvil. To measure hard to reach locations. To measure from a hole or slot to an edge. RATCHED THIMBLE STOP. Carbide Tipped Spindle Face.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: PEC Brand: PEC

Plunger of gages expand from center, under spring tension, to size of hole being measured and is then locked in place by knurled knob. Measurement is made by a micrometer or a caliper.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-244-101-1

The Fowler 52-244-101-1 outside micrometer has a Vernier-scale with a 0 to 1" measuring range and a 0.256" diameter ball-style anvil/spindle pair for measuring the inside and outside diameters of sleeves, collars, tubing, and other curved and cylindrical surfaces. The Vernier scale has 0.0001" graduation intervals and an accuracy of 0.0001" for precise readings and accurate measurements. The ball-style anvil/spindle pair has hardened and ground measuring faces to contact curved surfaces at a single point for accurate measurement of inside curves. The slim anvil stem measures wall thickness in narrow and hard-to-reach spaces. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame provides durability and long life. The micrometer includes a standard, a wrench, and a fitted case. SpecificationsDisplay type Vernier scale Anvil/spindle style Ball Measuring range 0 to 1" Graduation interval 0.0001" Accuracy 0.0001" Thimble style Ratchet Anvil/spindle diameter 0.256"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be ...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-244-101-1

The Fowler 52-244-101-1 outside micrometer has a Vernier-scale with a 0 to 1" measuring range and a 0.256" diameter ball-style anvil/spindle pair for measuring the inside and outside diameters of sleeves, collars, tubing, and other curved and cylindrical surfaces. The Vernier scale has 0.0001" graduation intervals and an accuracy of 0.0001" for precise readings and accurate measurements. The ball-style anvil/spindle pair has hardened and ground measuring faces to contact curved surfaces at a single point for accurate measurement of inside curves. The slim anvil stem measures wall thickness in narrow and hard-to-reach spaces. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame provides durability and long life. The micrometer includes a standard, a wrench, and a fitted case. SpecificationsDisplay type Vernier scale Anvil/spindle style Ball Measuring range 0 to 1" Graduation interval 0.0001" Accuracy 0.0001" Thimble style Ratchet Anvil/spindle diameter 0.256"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be ...