Dimensional Measurement - Page 302

Manufacturer: Starrett Brand: Starrett Model: SD167FHZ

The set includes ranging from 0.020" -0.300" (0.020" increment) and 0.350" - 0.500" (0.050" increment), 25 gauges in set. Two slots are provided in the holder permitting gages to be held at 30 degree or 45 degree, either square in the slot or tipped to one side. The holder is 4" (100mm) long, providing good reach and balance. The set is furnished in an attractive case, providing complete protection and easy, instant selection of the right gauge size for the job.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: Q-Mark Manufacturing Inc. Brand: Q-Mark

M5 stylus, 0.5 mm diameter ruby ball, tapered carbide stem, 11.0 mm diameter x 10.0 mm long stainless steel base. Minor stem diameter is 0.3 mm, major stem diameter is 1.0 mm.  Overall stylus length is 30.0 mm.  Stylus weight is 5.78 grams.

Manufacturer: Brand new Brand: Brand new

Indicator Features: Easy to read 1-3/16'' white face with black markings Crisp graduations Durable satin chrome finish Graduations: 0.0005'' per line Includes a padded case Mini Magnetic Base Features: Reduced scale for work in tight areas. 3-D rigid metal arm movement central locking mechanism, one knob locking system Dovetail clamp for holding most AGD group test indicators Clamping hole for holding many AGD group indicators stem Overall Reach: 7.5" Magnet On/Off switch Power pull-50 lbs. V-shape on bottom surface for firm holding

Manufacturer: Docooler Brand: Docooler Model: CCT01

Features: Able to clear the calibration to start new applications. Able to recall / delete specified readings and delete group readings. Able to set / clear the high and low limit value for each group. Alarm symbol will be shown on the LCD while readings exceed the limit. Able to select the shown unit (including um, mm and mils) for the readings. Able to select different measuring speed for probe according to user's application. Able to connect the gauge with PC via USB interface and download the data stored in the gauge. Manually and automatic power off. Low battery and error indication. Package list: 1 * Coating Thickness Gauge 1 * Pack of Standard Foil 1 * Aluminum Substrate 1 * Steel Substrate 1 * USB Cable 1 * CD 1 * User Manual (English) Specifications:

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 7020-0151

HHIP 0-150 lbs direct readout torque wrench with 1/2" window. 1/2" drive. Meets or exceeds ISO 6789, us fed. Ggg-w-686d and ANSI B107.14M. Chrome-Vanadium ratchet gear with 32 teeth. Fully heat treated handle. Patented unique pull-push system that uses micro-click and reversible technology. Width of head is 1.4". depth of head is 1.23". overall Length is 19.5". release accuracy is +/- 3 percent . Push locking mechanism. Window scale design for easy reading. Comes with a fitted case.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 500-197-30 Color: Stainless Steel

The Mitutoyo 500-197-30 digital caliper has a 0 to 8" (0 to 200mm) measuring range with 0.0005" (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are more fragile mechanically and electronically, and do not resist coolant well. Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read. Digital calipers are commonly used in fields such as metalworking, mechanical engineering, machining, carpentry, and medicine.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Co...

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Yellow

Adjustable tolerance marks. M2.5 mounting thread for the measuring insert. Included in scope of supply: 3mm diameter ball tip, already mounted. Comes in cardboard box. Identification number. Inspection report with a declaration of conformity. 1mm Revolution.

Manufacturer: INSIZE Brand: INSIZE Model: 3233-3B

Spline micrometer, 2-3", graduation 0001" Type b.