Dimensional Measurement - Page 311

Manufacturer: Ridgid Brand: Ridgid

The RIDGID 14 in. Abrasive Cut-Off Machine features a 10 ft. cord for an extended reach on the jobsite. This cut-off machine has a large cutting capacity and can accommodate full bundles of metal studs. The 15-Amp, high-torque motor is designed for cutting through rebar, bar stock, angle iron and complete bundles of metal studs. Includes: (1) Reconditioned Ridgid ZRR4142 15 Amp 14 in. Cut-Off Machine (1) 14 in. Abrasive Wheel (1) Arbor Wrench (1) Vise Clamp (3) Mounting Screws (3) Flat Washers Operator's Manual This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to fully functional condition. Some products may contain cosmetic blemishes, scrapes, scratches and dirt but should work like new. If this is a gift, please keep this in mind. The factory provides a 1 year warranty available through a nationwide network of service centers. Purchase receipt is required.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-815-003-2

The Fowler 54-815 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016" provide precise readings and accurate measurements. Carbide measuring faces provide wear resistance. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The steel construction housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording and can be set to zero at any spindle location. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. A built-in clock logs the time measurements are taken and an automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016"Thimble styleRatchetData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outsi...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-815-003-2

The Fowler 54-815 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016" provide precise readings and accurate measurements. Carbide measuring faces provide wear resistance. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The steel construction housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording and can be set to zero at any spindle location. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. A built-in clock logs the time measurements are taken and an automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016"Thimble styleRatchetData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outsi...

Manufacturer: Starrett Brand: Starrett Model: 82C3

All probes are furnished with an actuating rod.

Manufacturer: Tesa Group Brand: Tesa Group

Technical Specification Item Ball Tip Probe Insert Features 5mm Tungsten Carbide Ball Tip This listing is for each.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 117-102

The Mitutoyo 117 series Uni-Mike micrometer uses interchangeable anvils to support varied outside dimension (OD) measurement needs, and includes a flat and rod anvil. It has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle is carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: ASIMETO Brand: ASIMETO Model: 105-03-5

Carbide tipped, IP65 Digital Micrometers & Sets, ASIMETO

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-453 Color: White

Measuring force: 0.3N or less, Length: 15mm, Mass: 50 (g). It is Anti-magnet and Jeweled bearing type. Basic Set includes Indicator, Knurled Clamp Ring, 3/8" Diameter Stem (part number 902805) and .079" Diameter Carbide Contact Point.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: INSIZE Brand: INSIZE Model: 6801-1203

Magnetic v-block, 4.7x2.8x3.7".