|
|
-
4.8 of 5.0 with 5 Reviews
SALE PRICE: $289.10
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
2.625" Holemike XT Setting Ring
-
4.8 of 5.0 with 5 Reviews
SALE PRICE: $290.05 8% OFF
Manufacturer: Teren
Brand: teren
Manufacturer: Teren
Brand: teren
|
Applications: The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.The N probes measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc. Features: * Manual or automatic shut down. * Auto memory of calibration value,and auto recognize the substrate. * Operation process have buzzing reminder,while no buzzing in continuous mode. * Use USB data output and RS-232 data output to connect with PC. * Provide Bluetooth data output choice. * Separate Type can provide several type probe, measure can be more flexibility. Parameters: Operating Principle: Magnetic Induction / Eddy Current (F / NF) Measuring Range: 0~1250 um / 0~50 mil Resolution: 0.1 um / 1 um Min. Radius Workpiece: F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm Min. Measuring Area: 6 mm Min. Sample Thickness: 0.3 mm Accuracy: +- 1~3%n or +- 2.5 um Auto Power Off Metric / Imperial: Convertible Battery Indicator: Low Battery Indicator Operating Conditions: Temp. 0~40 degree, Humidity: 10~90 %RH Power Supply: 2 x 1.5 V AAA (UM-4) Battery Dimensions: 126 x 65 x 35 mm Weight: 81 g Package includes: 1. Main Unit 2. Probe (F Type / NF Type) 3. Calibration Base Set (F Type / NF Type) CTG-BS 4. Calibration Foils CTG-CF (1 set, 4 pieces) 5. Carrying Case 6. Operation Manual
-
4.8 of 5.0 with 20 Reviews
SALE PRICE: $292.14 1% OFF
Manufacturer: GOODSON
Brand: Goodson
Manufacturer: GOODSON
Brand: Goodson
Dial Indicator Only for MMCB-06
-
4.8 of 5.0 with 45 Reviews
SALE PRICE: $295.69 4% OFF
Manufacturer: Teren
Brand: teren
Manufacturer: Teren
Brand: teren
|
Applications: The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.). often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.The N probes measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc. Features: Manual or automatic shut down. Auto memory of calibration value,and auto recognize the substrate. Operation process have buzzing reminder,while no buzzing in continuous mode. Use USB data output and RS-232 data output to connect with PC. Provide Bluetooth data output choice. Separate Type can provide several type probe, measure can be more flexibility. Operating Principle: Magnetic Induction / Eddy Current (F / NF) Measuring Range: 0~2000 um / 0~80 mil Resolution: 0.1 um / 1 um Min. Radius Workpiece: F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm Min. Measuring Area: 6 mm Min. Sample Thickness: 0.3 mm Accuracy: +-1~3%n or +- 2.5 um Auto Power Off Metric / Imperial: Convertible Battery Indicator: Low Battery Indicator Operating Conditions: Temp. 0~40 degree, Humidity: 10~90 %RH Power Supply: 4 x 1.5 V AAA (UM-4)Battery Dimensions: 140 x 72 x 34 mm(5.5 x 2.8 x 1.3 inch) Weight: 215 g(Not Including Batteries) Package includes: 1. Main Unit 2. Probe (F Type & NF Type) 3. Calibration Base Set(F Type / NF Type) CTG-BS 4. Calibration Foils CTG-CF(1 set, 4 pieces) 5. Carrying Case 6. Operation Manual
-
4.8 of 5.0 with 17 Reviews
SALE PRICE: $296.80 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 6535-30
Manufacturer: INSIZE
Brand: INSIZE
Model: 6535-30
Adjustable angle block, 4.0x1.2x1.9".
-
4.8 of 5.0 with 29 Reviews
SALE PRICE: $299.88
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-516
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-516
|
The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...
-
4.8 of 5.0 with 8 Reviews
SALE PRICE: $315.32
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Fowler 6150mm Extension 54-265-090-0
-
4.8 of 5.0 with 25 Reviews
SALE PRICE: $316.99 1% OFF
Manufacturer: SMART SENSOR
Brand: Smart Sensor
Manufacturer: SMART SENSOR
Brand: Smart Sensor
Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Specifications: Trandsducer: φ10mm5MHZ/2.5MHZ Measurement Range: 1.2-225.0mm (Steel) Accuracy: ±(1%H±0.1mm) Resolution: 0.1mm Sound velocity:1000~9999m/s Operating Frequency:5MHZ/2.5MHZ Operating Condition: 0℃~40℃ Minimum limit for tube measuring: φ20*3mm(steel) Thickness data storage:10 groups Sound Velocity Measuring&Storage: 12 groups ---- Automatic Zero Calibration/Auto linear compensation/Coupling indicator ---- Backlight Display/ Auto/Manual Power Off/ Battery Indication
-
4.8 of 5.0 with 18 Reviews
SALE PRICE: $318.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 124MBZ
Manufacturer: Starrett
Brand: Starrett
Model: 124MBZ
|
The Starrett 124MBZ solid-rod inside micrometer set offers a range from 50 mm to 300 mm, is graduated at 0.01 mm intervals, and comes in a protective vinyl-and-steel case. The hardened, radius-ground anvils on rods are accurate. Solid-rod inside micrometers are often used for measuring the inside diameter of a cylinder or ring and when measuring parallel surfaces. The micrometer head, rods, and spacing collars are assembled to the desired range and then adjusted to obtain the measurement. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.
-
4.8 of 5.0 with 32 Reviews
SALE PRICE: $318.39 9% OFF
Manufacturer: VETUS INSTRUMENTS
Brand: BENETECH
Manufacturer: VETUS INSTRUMENTS
Brand: BENETECH
Technical Specifications * Measurement range: 0~1500µm * Accuracy: ±(3%H±1µm) * Resolution: 0.1uM (100um) * High sensitive probe, accurate measurement * With zero point, two point and three basic calibration method, may at any time to conduct * System error correction *Measuring modes:single measurement/continuous measurement / difference measurement * Data storage / data query / data delete function * Statistical measurement data of the maximum value, minimum value, average value, standard deviation and the number of measurements * Buzzer prompt function * Metric conversion function * Low power indication function * Automatic shutdown function * LCD backlight function * Power supply: 3 * 1.5V AAA battery(Battery not included in the package)
|
|