Dimensional Measurement - Page 319

Manufacturer: Starrett Brand: Starrett Model: F2740-3

The Starrett F2740-3 Wisdom Plus Electronic Indicator has four user-selectable resolutions with a maximum resolution of 0.0005” (0.01 mm), accuracy of + or - 2 resolutions, and a total measurement range of 0” - 2” (0 - 50 mm). The digital display has a sealed housing with a glass scale design, minimum, maximum, and last read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The display flashes when user-defined tolerances are exceeded, and the total indicator reading (TIR) capability displays the absolute difference between the highest and lowest readings. The 5-3/4” (146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4” (6-mm) diameter hole, and an output jack that allows for data transmission to PC compatible RS-232C (serial port) supported devices. Manufactured to American Gage Design (AGD) standards, the indicator can be powered from any of three sources: 110V AC adaptor, rechargeable zinc-air batteries, or through the data port. An auto-off feature turns the indicator off after 10 minutes of nonuse. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to ...

Manufacturer: Starrett Brand: Starrett Model: 78/782K

The Starrett Internal Extensions for 78 Series Internal Micrometers includes 2-12-Inch (50-300mm) sizes, 6-Inch extension size, and fits models 8XT/780XT/781XT-2 thru 12.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-796BCAL

The calibrated Mitutoyo 543-796BCAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for accurate measurements. This model is Ingress Protection certified IP53 for protection against dust and spraying water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with flat backData outputYesDimensions103.9 ...

Manufacturer: Flexbar Brand: Flexbar

Flexbar Chamfer Gage. instant Measuring of Chamfers and Tapered hole Diameters. Direct Diameter Reading to .001". - Metric Units for Reading to 0,01mm. Hardened and Precision ground 3-Blade steel plunger assures High accuracy and repeatability. No Setting masters required - Zero on surface Plate - to Reading on Gage. Model No. 16341, Chamfer Gage, 1-2" Capacity, 0-90 Degree Range

Manufacturer: Fowler Brand: Fowler Model: X Class

Features X Class Used for accurate setting of internal measuring instruments Made from oil-hardened, non-shrinking gage steel, hardened and tempered to Rockwell 62C Subzero treated at minus 80 C for dimensional stability Actual size etched on each master ring

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-212

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in metric units for making precise inside diameter (ID) measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1900C-2

NOSHOK Series 1900 compact digital indicator provide digital display of any desired unit of pressure, temperature, level, force or flow measurement. Their 3-1/2" digit display has a span range of 0 to 1999 and is available in a positive image reflective LCD or in an optional back-lit version. They are housed in a compact, lightweight, impact resistant plastic case with a clear viewing lens. The sealed front panel installation also meets NEMA 4x/IP65 specifications for wash down and dusty environments, when properly installed. 4mA to 20mA or 10mA to 50mA Input signal. 160 ohms max at 20mA; 60 ohms max at 50mA Input impedance. 100mA Maximum input current. 0 to 1999 Span range, -1999 to 1999 Offset range. +/-0.1 percent to 1 digit. 2.5 Readings per second, nominal Reading rate. 1.5 seconds to settle for a step change Response time. -40 to 175 degree F Storage temperature. 32 to 140 degree F Operating temperature. CE compliant to EMC norm EN 61326:1997/A1:1998 RFI, EMI and ESD protection. Fits DIN standard cut-out 2.68" x 1.30". Compact, lightweight, impact-resistant NEMA 4X, IP65 housing with sealed front bezel.

Manufacturer: XZB Brand: XZB

Auto Power Off Low Battery Indication Zero Point & Two Point Calibration Seven Point Calibration Max/min Data Recording Average/Standard Deviation Recording Single & Continuous Measuring Mode Option

Manufacturer: Flexbar Brand: Flexbar

Flexbar E.I.M.B.. Electrical interlocking Mounting Brackets for use With All Flexbar Latheguards and Small Chuckguards 4 Models Available to suit individual lathe designs. Functioning: Once Wired to motor-control circuit (motor starter), the cam-operated limit switch opens the contacts when the safety shield is tilted up . . . and the Machine stops running. Specifications: Limit switch: Roller-Type Roller and Head are metal in sealed Plastic housing. Electrical life - 1 million cycles Mechanical life - 30 million cycles. NEMA 4 rated. ApProvals: UL A300, UL E140497, CSA A 300 & CSA LR26716 M20. Snap acting SPDT inO-inC With Double break ensures switch will open in event of minor contact welding. Contact Block & roller Head are modular hence replaceable Without Discarding entire device. Electrical Conduit: Extremely Flexible and WithStands repeated Flexing. UL recognized - exceeds industry Standards. Liquid tight vs. oil, Water and most chemicals. *Fittings: inside is nylon With BUNA-N gland which seals the two each (2) 18 Gage Wires,Plus a grounding Wire. included With each E.I.M.B. Model: Electrical interlock Box With safety limit switch, wiring and Mounting bracket With locking knob, Special Latheguard Tube, Wiring Diagram. Dimensions of Rectangular box portion of E.I.M.B.: Approx. 6-5/8 X 2-3/8 X 1-5/8 inches (168mm x 60mm x 41.3mm) Model No. 17001., Mounts at Back of lathe. for All shield Sizes.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 526-123

Mitutoyo Split Ball Dial Bore Gage, Range: .4 - .7", Dial indicator graduations: .0001"