|
|
-
4.7 of 5.0 with 19 Reviews
SALE PRICE: $2.97 4% OFF
Manufacturer: Reid Supply Company
Brand: Precision Brand
Manufacturer: Reid Supply Company
Brand: Precision Brand
Used for close spacing and extremely tight tolerance situations. Steel shims are made from close grain C1095 high carbon steel, hardened and tempered to Rc 48-62. Stainless steel shims are made from 1/2 wide, 300 series stainless steel, hardened and tempered to Rc 45-55. Flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 and can be easily cut to length.
-
4.7 of 5.0 with 4 Reviews
SALE PRICE: $3.00
Manufacturer: PJ Tool
Brand: PJ Tool
Manufacturer: PJ Tool
Brand: PJ Tool
These outside spring caliper are, spring loaded, hardened and tempered. They are available in a variety of sizes please specify in product options above.
-
4.7 of 5.0 with 28 Reviews
SALE PRICE: $3.04 4% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4103-0096
Manufacturer: HHIP
Brand: HHIP
Model: 4103-0096
Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".
-
4.7 of 5.0 with 45 Reviews
SALE PRICE: $3.04 4% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4103-0117
Manufacturer: HHIP
Brand: HHIP
Model: 4103-0117
Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".
-
4.7 of 5.0 with 49 Reviews
SALE PRICE: $3.04 4% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4103-0100
Manufacturer: HHIP
Brand: HHIP
Model: 4103-0100
Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".
-
4.7 of 5.0 with 13 Reviews
SALE PRICE: $3.28 4% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
|
The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060â€. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2†long, are within .00001†round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040†to 1.0005†(increments of .001â€), with a tolerance of -.0002†for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825†are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.
-
4.7 of 5.0 with 14 Reviews
SALE PRICE: $3.35 4% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
|
The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060â€. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2†long, are within .00001†round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040†to 1.0005†(increments of .001â€), with a tolerance of -.0002†for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825†are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.
-
4.7 of 5.0 with 13 Reviews
SALE PRICE: $3.35 4% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
|
The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060â€. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2†long, are within .00001†round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and is available with either a steel or black guard finish (to inhibit corrosion and for indicating wear). Sizes are available from .0040†to 1.0005†(increments of .001â€), with a tolerance of -.0002†for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825†are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.
-
4.7 of 5.0 with 4 Reviews
SALE PRICE: $3.39 3% OFF
Manufacturer: Johnson Level & Tool
Brand: Johnson Level & Tool
Model: J112
Manufacturer: Johnson Level & Tool
Brand: Johnson Level & Tool
Model: J112
12" Aluminum Rule - 1/8 & 1/16"; 1-1/8" Wide Corosion resistant Aluminum rule with bold easy to read numbers.
-
4.7 of 5.0 with 22 Reviews
SALE PRICE: $3.59 4% OFF
Manufacturer: Hatori
Brand: Hatori
Color: Silver
Manufacturer: Hatori
Brand: Hatori
Color: Silver
Description:
Manufactured using high carbon steel and high quality chrome vanadium steel for strength, durability and resistance to corrosion. These tools feature ID stamping showing size and brand.
Product Features:
Product Name : Feeler Gauge;Material : Metal
Color : Silver Tone;Total Size : 10.8cm/4.25" x 1.3cm/0.5" x 1cm/0.4" (L*W*T)
Blade Number : 17;Blade Size : 9cm/3.5" x 1cm/0.4" (L*W)
Blade Type(mm) : 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.1, 0.15. 0.2. 0.25, 0.3, 0.4, 0.5, 0.75, 1.0;Total Weight : 40g
Package Content : 1 x Feeler Gauge
|
|