Dimensional Measurement - Page 386

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of M60 x 3 thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: Starrett Brand: Starrett Model: 234MA-450

Starrett 234MA-450 End Measuring Rod with Insulated Handle and Spherical Ends, 450mm Length. Starrett 234 End Measuring Rods or “standards” are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.

Manufacturer: Flexbar Brand: Flexbar

The Original Made in U.S.A. Flexbar. Instant Positioning - instant Locking Universal Holder/Positioners for All AGD indicators and Electronic Sensors (Lug Backs Too!). The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Model No. 18028, Flexbar 16" Height, With Magnet Base With Fine adjustor. Magnet Pull is 65 lbs. On/off.

Manufacturer: Starrett Brand: Starrett Model: 1202F-6 Color: White

The Starrett 1202F-6 dial caliper measures 0 to 6 inches with 0.01” and 1/64” accuracy. This handy measuring tool allows for reliable and accurate depth, inside, and outside readings with the sharp, black graduations on the no-glare, satin-finished bar, crisp lines on the dial face, and knife edge contacts on the jaws. The dial’s inner, decimal scale is white, while the outer, fractional scale is yellow. One full revolution of the dial is equivalent to 0.100”. The knife-edge contacts can be used to scribe parallel lines on the workpiece. This caliper can be used with one hand through operating the fine adjustment roll with the thumb. The lock screw locks the dial bezel and holds the sliding jaw in position. The depth rod is integrated into the rack of the caliper, unlike many calipers which offer a detachable depth rod, or none at all. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Positive double pinion anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls – which prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash. Double pinion anti-backlash systems have two round gears (also called pinions) in contact with the rack gear that extends down the length of the caliper itself. The two pinions have a lower chance of disengaging with the rack gear than a single gear, thereby keeping the caliper more accurate than a single gear anti-backlash system. The rack teeth point down to keep foreign matter from clogging the gear operations. This prevents measurement errors where metal chips could interfere with proper caliper operation. Calipers measure the distance between two opposing sides of a...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-001-0

The Fowler 54-860 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. An ABS (acrylonitrile butadiene styrene) housing protects electronic components against impact and provides electrical insulation. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring range0 to 1"/0 to 25mmResolution0.00005"/0.001mmAccuracy0.00016"/0.004mmThimble styleFrictionData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manu...

Manufacturer: CEM Brand: CEM

Laser Distance Meter for 70m /229ft ILDM-150 Wireless Bluetooth for Iphone/Android FEATURES: Area, volume calculation ; Indirect measurement using pythagoras Indirect measurement using tilt sensor ; Angle measurement using tilt sensor +/- 65 deg Addition / Subtraction ; Continuous measurement ; Min / Max distance tracking Timer (self-triggering) ; Continuous laser ; Stake out function Display illumination and multi-line display ; Multifunctional end piece ; Tripod thread SPECIFICATIONS: Item Weight 15.2 ounces Product Dimensions 7 x 2.8 x 4 inches

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's NPTF Tapered Pipe Plug Gages are used to check tapered internal pipe threads. Perfect for inspecting standard pipe and pipe fittings.

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of 1 11/16-8 UN thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time.As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 500-196-30 Color: Stainless Steel

The Mitutoyo 500-196-30 digital caliper has a 0 to 6" (0 to 150mm) measuring range with 0.0005" (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are more fragile mechanically and electronically, and do not resist coolant well. Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read. Digital calipers are commonly used in fields such as metalworking, mechanical engineering, machining, carpentry, and medicine.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Co...