|
|
-
4.7 of 5.0 with 31 Reviews
SALE PRICE: $125.20 41% OFF
Manufacturer: M-D Building Products
Brand: M-D Building Products
Model: 92325
Color: NA
Manufacturer: M-D Building Products
Brand: M-D Building Products
Model: 92325
Color: NA
Using custom patented sensor technology, SmartTool has been the digital level leader for over 20 years. Displaying in degrees, % slope or inches per foot, it is accurate to 1/10 of a degree and holds the best accuracy of any digital level on the market that MD has tested. Its 9V battery (included) runs for over 500 hours and has the ability to beep at any angle you choose.
-
4.7 of 5.0 with 27 Reviews
SALE PRICE: $128.00
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: P900-S104
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: P900-S104
-
4.7 of 5.0 with 33 Reviews
SALE PRICE: $128.00 1% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.
-
4.7 of 5.0 with 5 Reviews
SALE PRICE: $128.99 1% OFF
Manufacturer: Brown & Sharpe
Brand: Brown & Sharpe
Manufacturer: Brown & Sharpe
Brand: Brown & Sharpe
-
4.7 of 5.0 with 22 Reviews
SALE PRICE: $129.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 153-204
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 153-204
|
The Mitutoyo 153 series micrometer head has a vernier scale in metric units for taking precise measurements and a non-rotating spindle that helps prevent wear and deformation on the workpiece. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm or 0.001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.7 of 5.0 with 39 Reviews
SALE PRICE: $129.70 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-13H16
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-13H16
Setting ring, 13/16 inch dia.
-
4.7 of 5.0 with 16 Reviews
SALE PRICE: $131.95 18% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7304S
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 7304S
|
The Mitutoyo 7304S dial thickness gauge is for measuring the thickness of workpieces. This gauge has a measurement range of 0 to 1.0", a resolution of 0.001", and an accuracy of + or - 0.002". The dial indicator face is white for precise and readable measurements in inches. The anvil is flat and the contact point and anvil are ceramic for corrosion-resistance. This model has a grip handle, thumb trigger, and spring-loaded spindle for accurate measurements. It has a measuring force of 2.0 Newtons (N) or less.SpecificationsAnvil/spindle typeFlat, spring-loaded spindle, ceramicRange0 to 1.0"Graduations0.001"Accuracy+ or - 0.002"FaceDial with white face displays in inchesBodyStandard type, grip handle, and thumb triggerMeasuring forceLess than 2.0NShipping weight0.8lb.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
4.7 of 5.0 with 31 Reviews
SALE PRICE: $132.01 1% OFF
Manufacturer: O.E.M.
Brand: Unknown
Model: ASC557212ACW01
Manufacturer: O.E.M.
Brand: Unknown
Model: ASC557212ACW01
|
DAVIS TURBO METER ELECTRONIC WIND SPEED INDICATOR 0-99 MPH Turbo Meterâ„¢The Turbo Meter provides uncommon accuracy, sensitivity, and pocket-sized convenience. It is based on the principle that a freely turning turbine will rotate at a speed directly proportional to the wind speed. To insure maximum sensitivity and accuracy, the turbine is suspended on sapphire jewel bearings, and its rotation is sensed by an infrared light beam which adds no friction. The resulting signal is processed electronically by an LSI (Large Scale Integrated) circuit for improved reliability and reduced size. A special three digit display is used for extra resolution and provides excellent viewing contrast in bright sunlight. A handy switch selects between four different scales knots, feet per minute, meters per second, and miles per hour for unmatched versatility. Unit is compact size (2.6" x 4.7" x .7" 12cm) and light weight ( 3oz., 85g). Measures wind speed from 0 - 99.9 mph.
-
4.7 of 5.0 with 50 Reviews
SALE PRICE: $132.58 15% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 3417SB
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 3417SB
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.7 of 5.0 with 48 Reviews
SALE PRICE: $133.72 1% OFF
Manufacturer: Fowler
Brand: Fowler
Model: X Class
Manufacturer: Fowler
Brand: Fowler
Model: X Class
Features X Class Used for accurate setting of internal measuring instruments Made from oil-hardened, non-shrinking gage steel, hardened and tempered to Rockwell 62C Subzero treated at minus 80 C for dimensional stability Actual size etched on each master ring
|
|