|
|
-
4.7 of 5.0 with 17 Reviews
SALE PRICE: $688.00
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 209-917
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 209-917
Mitutoyo Dial Caliper Gage 209-917, External Measurement Type, 0-2.0 In, .001 In, 169mm Depth.
-
4.7 of 5.0 with 50 Reviews
SALE PRICE: $696.79
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Fowler Checkmaster Tooling 54-105-200-0
-
4.7 of 5.0 with 31 Reviews
SALE PRICE: $705.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-402
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-402
Color: White
|
The Mitutoyo 209 series external measurement caliper gauge has a dial display and large measuring depth for taking outer dimension (OD) comparison measurements in metric units of thickness of grooves or tubes, and other hard-to-reach external dimensions.. Depending on the model, these units come with pairings of ball contact points suitable for measuring external wall thickness of tubes, and/or chisel contact points suitable for measuring flat surfaces. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Mitutoyo manufactur...
-
4.7 of 5.0 with 28 Reviews
SALE PRICE: $731.44 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-596B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-596B
2 in/50.8mm, .00005/.0001/.0005 In/0.001/.01mm, ID-C ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, Calculation Type.
-
4.7 of 5.0 with 9 Reviews
SALE PRICE: $735.00 18% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-872
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-872
|
The Mitutoyo 368 series Holtest (Type II) vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0002â€. The measuring faces are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.7 of 5.0 with 35 Reviews
SALE PRICE: $738.05 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
Steel Rule, Construction: Heavy Spring-Tempered Steel, Graduation Type: 16R, Graduations: Quick-Reading 32nds, 64ths, Aircraft Quick-Reading 50ths, 100ths, Length (In.): 48, Width (In.): 37257, Finish: Satin Chrome, Markings: Black
-
4.7 of 5.0 with 11 Reviews
SALE PRICE: $765.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-273
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-273
|
The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001†or 0.0002†depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.7 of 5.0 with 45 Reviews
SALE PRICE: $765.12 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
Steel Rule, Construction: Steel, Length (In.): 72, Width (In.): 11753
-
4.7 of 5.0 with 19 Reviews
SALE PRICE: $768.24 85% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 128CZ
Manufacturer: Starrett
Brand: Starrett
Model: 128CZ
The set consists of a satin-chrome micrometer head which can be used in combination with any one or more of a series of rigid, tubular steel measuring rods to obtain the required length. The micrometer head is a modification of our No. 63, which has a 2" range. The head has a basic length of 4" which can be lengthened to 6" by means of its measuring range. Interchangeable tubular steel measuring rods and extension rods are lightweight with extreme rigidity, rods screw into each other and seat against hardened ground and lapped surfaces necessary for high accuracy, rod diameter 5/8". Movement of screw: 2", Range with Combination Head: 11-299". Set includes (1) 4-6" Head, (1) each 2", 4", 6", 8", 10", 12" Rods, (1) 12" extension rod, (2) 24" extension rod.
-
4.7 of 5.0 with 7 Reviews
SALE PRICE: $809.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: S2000AZ
Manufacturer: Starrett
Brand: Starrett
Model: S2000AZ
Accessory Set for 2000 Includes: Probe Tip 5-Way Adaptor, .040 (1mm) Carbide Contact Point, .078 (2mm) Carbide Contact Point, .120 (3mm) Carbide Contact Point, Contact Wrench, .400 (10.2mm) Cylindrical Probe, Circular Carbide Scriber, Depth Gage Attachment, Holder for Dovetail Indicators.
|
|