Dimensional Measurement - Page 414

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel no-go (-) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of -.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: Natiny Brand: Natiny Model: Tsmile Color: Yellow

Description: 100% brand new and high quality. Great layout tool for creating complex shapes and angles. Easy to make repeat cuts on arches and joists. Template tool can be set to mark bricks, tiles, lumber, laminates, and others. The arms are calibrated in inches and metric measures. The Angle-ruler folds for easy storage and utilizes a unique tightening mechanism for one-handed operation. Portable and lightweight, take the Angle-ruler on the go to any job site. Perfect for builders, craftsmen, weekend warriors and DIY-ers alike, it's an essential tool for any toolbox! Save time, money and effort. Package Include: 1 x Angleizer Template Tool

Manufacturer: IRWIN Brand: Irwin Tools Model: 1794485 Color: Blue

Carry this anywhere. It fits easily into a tool pouch or pocket, and even has a clip to keep it secured. 5-inch long level is has a top-read window. Molded frame is durable in all conditions. Vials are easy to read. IRWIN Tools Pocket Level (1794485)

Manufacturer: Johnson Level & Tool Brand: Johnson Level & Tool Model: B75XXX Color: Multi

8" Sliding T-Bevel, Durable, High Impact Plastic Handle With Hand Grip, Stainless Steel Blade With Wing Nut Fastener. The Johnson Level & Tool B75 Structo-Cast 8-Inch Sliding T-Bevel is designed for general carpentry use. The T-bevel has a movable blade that allows you to copy any angle, from 0 to 360 degrees, and transfer it onto other surfaces such as moldings or lumber. This T-Bevel can is designed for durability and easy use, with a high-impact plastic handle and grip, as well as a stainless-steel blade with a wing-nut fastener. The T-bevel is covered by a 1-year limited warranty.

Manufacturer: EK Brand: EK

Manufacturer: HHIP Brand: HHIP Model: 4103-0156

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0126

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0196

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: TEXAS INSTRUMENTS Brand: Texas Instruments Model: BQ27441DRZT-G1B-TEXAS INSTRUMENTS

Price for: Tape & Reel Cut 1 . Battery IC Case Style:SON.Battery Management Function:Fuel Gauge.Battery Type:Li-Ion, LiMn2PO4.IC Interface Type:I2C.No. of Pins:12.Operating Temperature Max:85C.Operating Temperature Min:-40C.Packaging:Cut Tape.Supply Voltage Max:4.5V.Supply Voltage Min:2.45V

Manufacturer: Reid Supply Company Brand: Precision Brand

Used for close spacing and extremely tight tolerance situations. Steel shims are made from close grain C1095 high carbon steel, hardened and tempered to Rc 48-62. Stainless steel shims are made from 1/2 wide, 300 series stainless steel, hardened and tempered to Rc 45-55. Flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 and can be easily cut to length.