Dimensional Measurement - Page 44

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-323-1205

This Brown & Sharpe 599-323 Series steel rule has inch graduations and a chrome finish for measuring in woodworking, carpentry, and machining applications. The graduations vary by model and include numbered 10ths and 50ths (3R), numbered 10ths and 100ths (5R), or 8ths and 16ths (4R) on one side and 32nds and 64ths on the reverse. The spring-tempered stainless steel body construction is fully flexible for durability and flexibility. The chrome finish helps reduce glare and is rust-resistant.Rules are devices used to measure distances, or to rule straight lines. Rules have markings at specified intervals (also called graduations), as opposed to straight edges, which lack graduations and are used solely to draw a straight line. Nearly all rules are straight edges, except for rounded rules used to measure circles and arcs of angles in geometry applications. Rules can vary from high-quality steel instruments used by machinists; to retractable rules (also called tape measures) used in carpentry and for home-use; to simple wooden or plastic rules used in primary and secondary schools.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: Dewalt Brand: DEWALT Model: 22-20165

Base Length: 10 3/4"Rule Length: 6 3/4"

Manufacturer: Yueqing Meba Electric Co.,Ltd Brand: MEBA

●High resolution 0.05° ●Zero-setting at any position ●Measurement range 0-360 degree ●Strong blade lock can hold the readout securely ●Reversible reading allowing to filp the display reading to right side up ●Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 8 inches ●Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool

Manufacturer: QLT by Marshalltown Brand: Qlt By Marshalltown Model: TS917

Marshalltown TS917 QLT Drywall T-square Marshalltown TS917 QLT Drywall T-square Features: Silver anodized finish with black epoxy paint numerals for long wear and legibility Reverse ruled to read from either edge Head is notched to permit full length cut Stud location marks aid in nailing Made in USA Marshalltown TS917 QLT Drywall T-square Specifications: Silver anodized finish with black epoxy paint numerals for long wear and legibility Reverse ruled to read from either edge Head is notched to permit full length cut Stud location marks aid in nailing 47 7/8-Inch long.

Manufacturer: Start International Brand: START International

PEAK double lens linen tester. Known for their versatility and portability, high quality, optically ground glass lenses. Lenses are mounted in a heavy duty, precision machined, black zinc frame. They can be easily folded and carried comfortably in a pocket. Color corrected lenses. 9X magnification. 0.50 lens diameter. 0.5" field of view.2 glass lens optical system. Base measures 1-3/16" length by 7/8" width.

Manufacturer: Shinwa Japanese Measuring Tools

This precision 600 mm metric rigid ruler is made by Shinwa Measuring Corporation, a premier tool manufacturer. Rule is made from spring tempered and hardened stainless steel and is 1.180" wide by .052" thick. It has a "zero-glare" satin chrome finish on the face that can be easily read in both low and bright light conditions. One face has metric graduations in both .5mm and mm and the reverse side has metric conversion tables and tap drill sizes. Graduations are precision photo etched and then black filled for easy readability. 100 mm divisions are marked in red. The sides of each rule are precision ground parallel to each other. One end is accurately ground square to allow accurate reading, while the other end is rounded with a hole for hanging.

Manufacturer: Starrett Brand: Starrett Model: 79B-6

The Starrett 79B-6 “Yankee” spring-type outside caliper opens to 6” (150 mm) with sturdy construction and smooth action. The threads of the spring nut firmly engage the screw with pressure from the leg. When pressure is withdrawn, the nut automatically releases itself and slides freely over the screw, saving time in opening and closing. It is made of flat stock, high-grade steel, for easily reproducible and accurate transfer of measurements of the external size of an object. This caliper has flat, inward curving legs for outside measurements and comes with a spring nut. Bow spring is flexible yet strong, for reliability. The durable legs are made of flat stock, high-grade steel for long life. The centrally located adjustment rod ensures smooth action when opening and closing the caliper. The hardened fulcrum stud is strong to help prevent give or play in the measurement, which would reduce accuracy. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differ...

Manufacturer: Precision Brand Brand: Precision Brand

Precision Brand Feeler Gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.

Manufacturer: Fowler Brand: Fowler & Nsk Model: FOW72-520-110

Dial Indicator

Manufacturer: SK Hand Tools Brand: SK Hand Tool Model: SKT45164

SKT45164 Features: -Improved access. -Diamond knurled grip. -Made in the U.S.A.. -Drive size: 3/8''. Product Type: -Extensions. Drive Size: -3/8". Quantity: -Single. Generic Dimensions: -Overall dimensions: 0.69'' H x 0.69'' W x 24'' D, 1.35 lbs. Dimensions: Overall Product Weight: -1.35 Pounds.