Dimensional Measurement - Page 466

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Precision Brand Brand: Precision Brand

Feeler Gage is made from 1/2 wide spring steel stock, close grain C1095 high carbon steel . Used in manufacturing, tool die, and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required . Hardened and tempered to RC 48-62. Thicknesses are clearly etched every 6 in decimal and metric. Also available in bulk quantities. Other sizes or thicknesses are available on special order.

Manufacturer: HHIP Brand: Z-Limit Model: 4109-0008

Z-Limit 0-8" /.001" Dial Caliper Manufactured and inspected at a world class factory that produces the highest quality European brands. Graduations of .001" in one revolution. Hardened stainless steel that is very well finished. Shockproof and smooth operation. Screw on rack. Knife-edge contacts for both inside and outside measurements. .001 Graduation .100 Per Revolution .001" Accuracy.

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00524012 Color: White

The Standard Gage shockproof dial caliper measures in inches with graduations on the dial every 0.001". One full revolution of the dial is equivalent to 0.100". The dial glides smoothly within its entire range and resists damage from minor impacts. Linear accuracy meets Deutsches Institut für Normung (DIN) 862 standards. This caliper is suitable for measuring inside dimensions (ID), outside dimensions (OD), and depth. Stainless steel construction offers corrosion resistance, increased accuracy, and long life. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-100-330-1

The Fowler 54-100-330-1 Euro-Cal IV digital caliper has an accuracy of +/- .001"/.02mm with 0.0005"/0.01mm resolution, with fractions in 1/64" increments for precise measurements, and it has a hardened stainless steel frame. The digital, single-value readout LCD shows inch, metric, and fractional units for versatility when measuring. It has a zero setting and absolute and incremental measuring modes for taking intermediate or differential measurements and direct metric/inch conversion. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. The hardened stainless steel frame offers corrosion resistance and long life. The caliper is rated to IP54 level of protection against dust and splashing water. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. It comes with a fitted case. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are mo...

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Merlintools Brand: Merlintools

metric M39 x 2.0mm set thread ring gage.

Manufacturer: Merlintools Brand: Merlintools

metric M39 x 4.0mm set thread ring gage.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage 101200200 .0110-.0600 CLASS ZZ MINUS SET

Manufacturer: Fowler Brand: Fowler

Fowler Involute Gear Tooth Gage 13Leaf .5-5mm 52-470-150