Dimensional Measurement - Page 484

Manufacturer: Start International Brand: START International

PEAK full focus measuring loupes. High precision optical quality achromatic lens system with focusing from +2 to -2 diopters gives you a needle-sharp, brilliant image from edge to edge. Comes complete with measuring reticle, protective carrying case and lens cleaning cloth. Fully coated for color corrected flat field viewing, Removable glass reticles with black scales. 360 degree clear acrylic base admits light from all directions. Smooth helicoid twist focus mechanism comparable to those used on high quality camera lenses. 15X power, 0.51" lens diameter, 0.55" field of view, 4 lens optical system, 0.005" scale division, 26mm scale diameter, 0.5" measuring range. Measures 1-3/8" diameter by 1-13/32" height.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-504T Color: White

Mitutoyo Pocket Test Indicator Set, Graduations: .0001", Range: .010", Dial Face: 0-5-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, 2 holding bars.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Black

The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...

Manufacturer: Starrett Brand: Starrett Model: 3600-5

Electronic Indicators have simple, powerful, easy-to-use functions, all at an attractive price. Versions are available for inch/metric and metric only.

Manufacturer: Reed Brand: Reed Instruments Model: DC-516

The REED Digital Micrometer has a 6 digit LCD display and features a mm/inch select and zero button.

Manufacturer: Manufacturer :Kaitian Electronic Technology Brand: Kaitian Model: KTM451CR Color: Red

4 vertical lines,1 horizontal line,5 points plus 1 down point;magnetic dampening;Light source:line 635nm,dot 650nm;Line width at 16.4 feet:1/10in;Horizontal accuracy:1/25in @ 16.4 feet;Vertical accuracy: 1/25in @ 16.4 feet;Down point accuracy:1/25in @ 4.92 feet;Zenith point accuracy(right angle):1/25in @ 9.84 feet;Auto leveling range:3 Degrees;Rotation degree: (360 Degrees)rotatable with fine adjustment function(3 Degrees);Working distance:up to 16.4 feet indoors and 164 feet outdoors with optional receiver;Battery type: rechargeable 3.7V 1200mAh Rechargeable Lithium Battery x 1pcs ;Time in continuous use: 8 hours;Working temperature:14 to 122 Fahrenheit;Storage temperature: -4 to 140 Fahrenheit;Dimensions: (D x L) 3.74in x 7.28in;Aluminum box: (L x W x H) 7.68in x 5.31in x 8.66in Application to home improvement,detection and location,loft,drywalling,curtain layout and other interior and exterior(with optional receiver or detector)constructions. Laser level full of features: Slope function with lock mode: can be used for any angle layout;Shock-proof design,4.92 feet fall without damage(wrapped with package);Indicates out-of-level condition,automatically make beep sound when it is not horizontally placed within 3 degrees,to ensure the leveling accuracy;Laser enhancement:the power of the laser lines can be doubled by pressing the outdoor button;AC and DC dual use: can be connected with both alternate and direct current,so you don't need to worry about the power source of the laser level while working;Receive mode:can be used for long distance operating,up to 164 feet outdoors with optional receiver/detector;Plumb point design,you can move the laser level whenever you want at anywhere. What's in the box: laser level,safefy glasses,aluminum case, aluminum case strap,AC power,angle adjustment bracket,operating instructions.

Manufacturer: T&O Brand: Toto

(6) Analog resolutions and automatic switch-over. Absolute and incremental measurement conversion. Direct metric/inch conversion. Tolerance set (permitting classification measurement). Origin data recall for absolute measurement. RS232 data output.

Manufacturer: ASIMETO Brand: ASIMETO Model: 105-01-5

Carbide tipped, IP65 Digital Micrometers & Sets, ASIMETO

Manufacturer: Fowler Brand: Fowler Model: X-Test

X-Test 1-1/2 Diameter Indicator to 3/8 Contact point case Contact point wrench Complete in Shop Hardened case Features: Jeweled movement Revolution counter Easy-to-read tilted dial Automatic reversal 210 Swivel arc 5/32 stem Tungsten carbide point: .080 Range: .060 inch model

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of M75 x 2 thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.