|
|
-
4.6 of 5.0 with 39 Reviews
SALE PRICE: $291.85 33% OFF
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 511-704
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 511-704
Mitutoyo Dial Bore Gage 511-704, 100-160mm with and without dial indicator, stem 8mm diam.
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $292.95 22% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
IP65 indicators with electronic module protected against the penetration of liquids. Made to measure in extreme workshop conditions - water and coolant resistant (IP65) - 44mm dial diameter - lets you take advantage of the mechanics combined with digital reading. Choice between absolute (ABS) and relative (REL) measuring modes. Numerical display. Possible setting of PRESET value to +/-130 mm. Inverse measuring direction. Direct conversion of the metric/inch units. Automatic shut down. 5-Digit LC display + sign. 6mm Digit height. Zero-setting of display. Deviation span of indication: 20 µm. Repeatability limit: 5 µm. Measuring force: 0.5 to 0.9 N (+/- 0.15 N). Maximum displacement speed: maximum 2 m/s. Number of measurements per second: 7. Working temperature range: + 5 degree C to + 40 degree C. Power supply: 3V lithium battery, type CR 2032. Autonomy: battery life > 3500 hours. Digital interface: RS232. Mass: 70 g. Electromagnetic compatibility: EN 61326-1. Degree of protection: IP65 (IEC 529). Shipping case including 1 lithium battery, type CR 2032. Identification number. Declaration of conformity. Models 0.01 mm with report.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $295.00 15% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 796XFL-4
Manufacturer: Starrett
Brand: Starrett
Model: 796XFL-4
|
The Starrett 795M/796M series LCD outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm) for outside diameter (OD) measurement, and a vernier scale in inch units for taking precise measurements. The micrometer has an Ingress Protection 67 (IP67) rating, which means that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes.The micrometer’s electronic microprocessor can preset, hold, or limit measurement at any position, as well as set a temporary zero position and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. Depending on the model, it may have Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s frame has a black wrinkle finish that helps resist rust and reduce glare. A friction thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The vernier scale on the thimble and sleeve has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring face for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single CR2032 lithium cell battery. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to ...
-
4.6 of 5.0 with 20 Reviews
SALE PRICE: $295.00
Manufacturer: iGaging
Brand: iGaging
Model: 35-700-H12
Manufacturer: iGaging
Brand: iGaging
Model: 35-700-H12
Igaging 12"/0.0005" digital height gauge W/absolute origin Super high accuracy high gage. Uses absolute technology that Memorize the zero origin. Accuracy can be increased with the use of engaging electronic probe/indicator (0.5" search: 35-950-12, 1.0" search: 35-950-25, 2.0" search: 35-950-50, 4.0" search: 35-950-99). the probe can connect with included cable to the height gauge for cumulative measurement. Features: connect and interact with igaging absolute digital indicator probes (35-950-xx) to increase the accuracy of the height gauge to 0.0002"-0.0004" large easy to read LCD display absolute technology that Memorize origin zero resolution: 0.0005"/0.01mm accuracy: 0.0015" indication variability: 0.0005"/0.01mm SPC/USB data port Carbide tipped scriber ABS/Inc. measurement includes indicator/probe holder height Gauge can use AC power with included cable.
-
4.6 of 5.0 with 4 Reviews
SALE PRICE: $299.00 1% OFF
Manufacturer: QINGLIANG --XIBEI
Manufacturer: QINGLIANG --XIBEI
Usually ships within 6 to 10 days.
ã€Product Features:
1ã€Model: QLR--16Â
2ã€Measurement Range: 16-20mmÂ
3ã€Accuracy: ±0.004mmÂ
4ã€Proofreading ring:Φ16mmÂ
5ã€L1:80mmÂ
A : 0.5mmÂ
6ã€Extension rod :150mmÂ
â— suitable to accurately measure the inside diamete of the blind hole and the through holes .Â
â— carbide measuring faces; Ratchet.Â
â— with a proofreading ring.Â
â— with a extension rodÂ
NOTE:Â
we will send the product to you as soon as possibleÂ
If you have any questions , please feel free to contact us
-
4.6 of 5.0 with 35 Reviews
SALE PRICE: $303.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-501B
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-501B
Mitutoyo Absolute Digimatic Solar Indicator ID-S, .5"-12.7mm, .00005"-.001mm, ISO, Stem Dia. 8mm, with flat back, SPC Output: yes
-
4.6 of 5.0 with 10 Reviews
SALE PRICE: $305.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 124-173
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 124-173
|
The Mitutoyo 124 series gear tooth micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and is for use with interchangeable ball-tipped anvil and spindle faces for measuring over-pin diameter of gears (sold separately). It also has a ratchet-stop mechanism for uniform pressure during adjustment.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. Separate spindle and anvil locks help provide secure locking of the measurement position. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.6 of 5.0 with 31 Reviews
SALE PRICE: $306.00 7% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 222AXR-1
Manufacturer: Starrett
Brand: Starrett
Model: 222AXR-1
|
The Starrett 222 series sheet metal micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer frame has a black wrinkle finish that helps resist rust. The vernier scale on the thimble and sleeve is graduated to 0.001â€, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
4.6 of 5.0 with 49 Reviews
SALE PRICE: $308.79 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 395-261
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 395-261
|
The Mitutoyo 395 series LCD tube micrometer has a vertical anvil for measuring tubing wall thickness. It also has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurement at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle has a flat measuring face that is carbide-tipped for wear resistance. The vertical anvil may be a pin, spherical, or cylindrical type. The micrometer’s ratchet-stop mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufa...
-
4.6 of 5.0 with 16 Reviews
SALE PRICE: $310.00 6% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 256RL-1
Manufacturer: Starrett
Brand: Starrett
Model: 256RL-1
|
The Starrett 256RL series Disc-Type micrometer has disc-shaped faces with flanges for measuring the distance between gear teeth, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.001â€. The micrometer has a tapered frame for measuring narrow slots and tight spaces, and is made of high-grade tool steel with a satin chrome finish that helps resist rust and reduce glare. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
|
|