|
|
-
4.6 of 5.0 with 6 Reviews
SALE PRICE: $362.54 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
|
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution. STDA1, STDA2, STDA3 Features Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder Ideal for use in the calibration lab, in the field or on the factory floor Certified and labeled in both Metric and Imperial units Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
-
4.6 of 5.0 with 8 Reviews
SALE PRICE: $362.70
Manufacturer: INSIZE
Brand: INSIZE
Model: 2827-16
Manufacturer: INSIZE
Brand: INSIZE
Model: 2827-16
Bore gage, 10-16", graduation 0005".
-
4.6 of 5.0 with 5 Reviews
SALE PRICE: $363.82 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 571-203-20
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 571-203-20
|
The Mitutoyo Series 571 ABSOLUTE Digimatic LCD Depth Gauge, Caliper Type, Metric, depending on the model, have a measurement range of 0 up to 1000mm, and a resolution (or smallest graduation interval) of 0.01mm, with up to + or - 0.02mm of accuracy . The LCD screen displays in metric, and can keep track of the origin point for the life of the battery (about 3 years under normal use). The bases are either 100mm or 250mm long, and the measuring faces of the units are hardened, ground, and lapped for durability and accuracy. The gauges conform to European Conformity (CE) marking and certain models in this series conform to the Ingress Protection 67 (IP67) standard. The display has origin-set, zero, and data output functions for convenience. The units support SPC output. The gauges in this series include an SR44 battery. Optional SPC cables, wider bases (for up to 450mm range models), and an LCD with data hold are sold separately. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
4.6 of 5.0 with 5 Reviews
SALE PRICE: $364.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 342-371
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 342-371
Mitutoyo IP65 Digimatic Crimp Height Micrometer, Range: 0 - .8", Resolution: .00005"/0.001mm, Thimble: Ratchet, Output: Yes, Standard: No, Functions: Origin-set, Zero / ABS, Hold, Auto power on/off, Data output, inch/mm conversion, Comment: Point Spindle
-
4.6 of 5.0 with 48 Reviews
SALE PRICE: $367.64 68% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 78.112379
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 78.112379
|
The Brown & Sharpe TESA Etalon Intalometer 531 vernier inside micrometer has three-point contacts for measurement of the inside dimension (ID) of through holes, blind bores, or short centering shoulders, and a vernier scale in inch units for taking precise ID measurements. A knurled friction thimble helps provide quick adjustment capability.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001â€. The measuring contacts are made of hardened steel and separated by 120 degrees. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
4.6 of 5.0 with 48 Reviews
SALE PRICE: $367.64 68% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 78.112379
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 78.112379
|
The Brown & Sharpe TESA Etalon Intalometer 531 vernier inside micrometer has three-point contacts for measurement of the inside dimension (ID) of through holes, blind bores, or short centering shoulders, and a vernier scale in inch units for taking precise ID measurements. A knurled friction thimble helps provide quick adjustment capability.The micrometer is made of high-grade tool steel for durability, and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001â€. The measuring contacts are made of hardened steel and separated by 120 degrees. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $370.70 67% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-163
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-163
|
The Mitutoyo 468 series Digimatic Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in metric units with resolution to 0.001mm. It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel are TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in ...
-
4.6 of 5.0 with 30 Reviews
SALE PRICE: $373.00 1% OFF
Manufacturer: DeFelsko
Brand: DeFelsko
Manufacturer: DeFelsko
Brand: DeFelsko
The Spare Probe for PosiTector 6000 F Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $374.70
Brand: Sinotech
Model: SK280F
Color: Black+red+yellow
Brand: Sinotech
Model: SK280F
Color: Black+red+yellow
Specification:
*Measuring range:0~1800µm
*Accuracy:±(3%H±1µm)
*Resolution: 0.1µm (100µm)
Features
l *Use Hi-sensibility sensor for precise measurement
l *Zero point, two point and basic, three different calibration
l *Measuring mode: Single, Continually and Difference
l *Data store/ Data recall/ Data delete function
l *Data Analysis: Average, Maximum, Minimum, Standard deviation and measuring times
l *Beep sound indication
l *Measure in Metric/Imperial
l *LCD backlight display
l *Low battery indication
l *Auto power off
l *Warranty: 12months
Package
*Packing method: Gift box + PP box
*Power supply: 9V battery
*Weight: 220g
*Dimension: 70*145*28mm
-
4.6 of 5.0 with 31 Reviews
SALE PRICE: $378.40
Manufacturer: INSIZE
Brand: INSIZE
Model: 2103-25E
Manufacturer: INSIZE
Brand: INSIZE
Model: 2103-25E
Electronic indicator, 1"/25.4mm, resolution 00005" 0/001mm.
|
|