|
|
-
4.6 of 5.0 with 14 Reviews
SALE PRICE: $582.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 824N
Manufacturer: Starrett
Brand: Starrett
Model: 824N
|
The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001†and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.
-
4.6 of 5.0 with 28 Reviews
SALE PRICE: $592.00
Manufacturer: Starrett
Brand: Starrett
Model: 823MEZ
Manufacturer: Starrett
Brand: Starrett
Model: 823MEZ
The Starrett 823 Tubular Inside Micrometer Set features 0.01mm graduation, with 10 rods, 100-1000mm range, and 25mm movement of screw.
-
4.6 of 5.0 with 6 Reviews
SALE PRICE: $593.00
Manufacturer: Starrett
Brand: Starrett
Model: 685M-1Z
Manufacturer: Starrett
Brand: Starrett
Model: 685M-1Z
These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.
-
4.6 of 5.0 with 43 Reviews
SALE PRICE: $600.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Digi-Met Standard Height Gages features: Cast Iron Base. Scriber is Carbide Tipped. Replacement and Longer scribers available. Resolution: .0005"/0.01mm. Repeatability: 10µm/.0005" (±2s). Overall Accuracy to .001"/0.02mm. Functions: Digi-Met Electronic Functions. Preset Function, Fine adjustment. Model No. 18220, Digi-Met Height Gage, Measuring Range: 0-12" (0-300mm),Measuring Column: 1.00 X .24". Base Dimensions: 4 X 2.4 X 1.6" Total Weight: 5.0 lbs.
-
4.6 of 5.0 with 6 Reviews
SALE PRICE: $600.00 1% OFF
Manufacturer: BRENCOR
Brand: BRENCOR
Manufacturer: BRENCOR
Brand: BRENCOR
With foam fitted case.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $626.58 11% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-308
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-308
Color: White
|
The Mitutoyo 209 series internal measurement dial caliper gauge has a dial display and large measuring depth for taking inside dimension (ID) comparison measurements in metric units of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. They should be used with a setting ring or micrometer (sold separately). Depending on the model, the caliper may come with ball contact points suitable for measuring external wall thickness of tubes, chisel contact points suitable for measuring flat surfaces, or an interchangeable set of contact points. The calipers’ jaws are spring loaded, which provide the point contacts with constant measuring pressure. The calipers have an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display...
-
4.6 of 5.0 with 47 Reviews
SALE PRICE: $631.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 688M-4Z
Manufacturer: Starrett
Brand: Starrett
Model: 688M-4Z
Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.
-
4.6 of 5.0 with 25 Reviews
SALE PRICE: $658.86 6% OFF
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: PRBFN-D
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: PRBFN-D
Defelsko PosiTector 6000 built-in probe. Heavy-duty, gold-plated locking connector for industrial environments. Probe retains its own unique calibration information (allowing full probe interchangeability). Ideal for one-handed operation. Measuring range: 0-60 mils. +/-(0.05 mils + 1 percent) 0-2 mils Then +/-(0.1 mils + 1 percent) accuracy.
-
4.6 of 5.0 with 36 Reviews
SALE PRICE: $663.72 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
Spare / Replacement probes for 6000 Series Coating Thickness Gauges. All probes are supplied with a NIST Traceable calibration certificate.
-
4.6 of 5.0 with 49 Reviews
SALE PRICE: $664.80
Manufacturer: INSIZE
Brand: INSIZE
Model: 3227-E3
Manufacturer: INSIZE
Brand: INSIZE
Model: 3227-E3
Three points internal micrometer, 2.5-3", graduation 0002".
|
|