Dimensional Measurement - Page 573

Manufacturer: TrippNT Brand: TrippNT Model: 50603 Color: White

TrippNT's White Polyethylene Leveling Table has a built in bubble level to see when platform is perfectly level. The tripod legs are easy to adjust and works well for leveling liquids or gels. 12 x 2 x 8 inches (width height depth); 2 pounds.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 102-707

The Mitutoyo 102 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet thimble mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame is tapered for measuring narrow slots and tight spaces, has a baked enamel finish for protection and durability and a friction grip. The vernier scale on the thimble and sleeve is graduated to 0.01mm or 0.001mm, depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-870-001-0

The Fowler 54-870-001 digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm provide precise readings and accurate measurements. Carbide measuring faces provide long life and wear resistance. A ratchet thimble applies consistent force for repeatability between users. A jet back and grey enamel finish provide durability and wear resistance. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a CR2032 battery (included), and includes a fitted case. Specifications Display type LCD Anvil/spindle style Flat Measuring range 0-1"/0-25mm Resolution 0.00005"/0.001mm Accuracy 0.00016"/0.004mm Thimble style Ratchet Data output RS-232 Power CR2032 Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically...

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00224003

The Standard Gage 00224003 Value Vernier Depth Gauge has a measurement range of 0 to 4" and is accurate to + or - 0.00020". Gradient spacing is 0.001"and the base is 4". Four high accuracy interchangeable depth rods are adjusted in increments of 1". The ratchet friction thimble and locking nut provide accurate measurement readings and adjustments. The base surface is hardened and ground for accurate readings. There is no need for resetting when changing rods. The gauge is made of steel for durability. Designed for measuring the depth of holes, slots, and recesses, and for inspecting jib, fixtures, and die work, these depth gauges are also convenient for measuring coordinate distances from a work surface to toolmakers' buttons.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of M45 x 4 thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: Stabila, Inc. Brand: Stabila

Vial accuracy guaranteed for life Tough box beam construction Water and brush clean-up Permanently calibrated, epoxy locked vials Made in Germany

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00224001

The Standard Gage 00224001 Value Vernier Depth Gauge has a measurement range of 0 to 4" and is accurate to + or - 0.00020". Gradient spacing is 0.001" and the base is 2.5". Four high accuracy interchangeable depth rods are adjusted in increments of 1". The ratchet friction thimble and locking nut provide accurate measurement readings and adjustments. The base surface is hardened and ground for accurate readings. There is no need for resetting when changing rods. The gauge is made of steel for durability. Designed for measuring the depth of holes, slots, and recesses, and for inspecting jib, fixtures, and die work, these depth gauges are also convenient for measuring coordinate distances from a work surface to toolmakers' buttons.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.

Manufacturer: Flexbar Brand: Flexbar

Precision Dual Reading Dial Calipers features inch and Metric Reading With Dial Ranges: 0-6" and 0-150mm,001"/.02mm Grad. 0-12" and 0-300mm,001"/.02mm Grad. Features a thumbroll for rapid Setting and easy adjustment. Smooth, Precise feel and accuracy. Stainless Steel - Hardened and Precision Ground Throughout. Special Features: Dial hand completes one revolution per each .100"; Large Dial means Wider-Spaced, easy- to-read Graduations. inverted covered rack helps prevent excess dirt accumulation in rack gear teeth to ensure Long Caliper life. Exclusive Dual Pinion Drive mechanism reduces wear on rack and Pinion. Adjustable Dial reads directly to .001"/0.02mm. Features Outside, inside and Depth Measurements. Beam is Graduated in .10" increments for easy Reference Points. Self-contained movement eliminates gear misalignment. Hardened stainless steel throughout With Measuring Faces Precision-ground and Micro-lapped for exceptional accuracy. Knurled lock assures Precise Settings. Accuracy = .001"/0.02mm. inch/Metric Reading Dial With independently moving hands reads inch and Metric simultaneously. Complete With fitted Case. Model No. 15789, 12" and 300mm Dual Dial Caliper

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-224-005-0

Fowler 52-224-005 inch digit micrometer has a choice of measuring range and a flat anvil/spindle pair with a 0.256" diameter measuring face for general purpose measuring. The digit display has 0.001" graduation intervals and the secondary vernier scale has 0.0001" graduation intervals and an overall accuracy of 0.00024" for precise readings. Microfine graduations on satin chrome finish provide clear reading, and the positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00016" parallelism on 4 to 5" micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The grey baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction providing accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Specifications Display type Digit with Vernier scale Anvil/spindle style Flat Measuring range Varies Digit graduation interval 0.001" Vernier graduation interval 0.0001" Accuracy 0.00024" Thimble style Ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00016" Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a d...

Manufacturer: Johnson Level & Tool Brand: Johnson Level & Tool Model: 40-6064 Color: Yellow

Includes Digital Angle Locator - 40-6064, 9V Battery, Instruction Manual, Soft-Sided Pouch