Dimensional Measurement - Page 580

Manufacturer: Tramex Brand: Tramex Model: HH14SP90

Heavy-duty Pin-type Electrode with Cable and 3" pins for use with CMEX2, MRH3 & PTM. Heavy Duty. Pin Type Electrode. With Cable and 3" Pins.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-402T

Mitutoyo Horizontal Test Indicator Set, Graduations: .0005", Range: .030", Dial Face: 0-15-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, holding bar.

Manufacturer: HHIP Brand: HHIP Model: 4400-0062

0.4-0.7" Dial Bore Gage ~ .0005" Graduation ~ 4" probe depth. ~ 11 anvils included. ~ for close tolerance measurements of holes, taper and roundness. ~ Gages are supplied with an AGD Group II dial indicator. ~ Easy setting with micrometers or ring gages. ~ Self centering. ~ Fitted case with anvils index.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-675 Color: White

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial whose pointer travels one rotation for each 0.1” measured to perform precise outside diameter (OD), inside diameter (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.1”. The smooth-moving dial is graduated to 0.001” and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measure...

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus with 0.5 mm carbide ball. Stainless steel base, 3 mm diameter x 5 mm long. Stepped carbide shaft with 1.0 mm major diameter, 0.60 mm intermediate diameter, and 0.30 mm minor diameter. Overall stylus length is 15.0 mm. Stylus weight is 0.28 gram.

Manufacturer: TENMA Brand: Tenma Model: 72-6693

TENMA 72-6693 DIGITAL LIGHT METER, 100000LUX

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-517-611-1

The Fowler 52-517-611-1 deep-throat outside micrometer has a 0 to 1" measuring range on a Vernier-scale, a flat anvil/spindle pair, and a 6" deep U-shaped throat to measure the thickness of sheet metal, plastic, or rubber workpieces where a depth up to 6" is required. The Vernier scale has 0.0001" microfine graduations on satin chrome finish for easy reading. A 0.00003" flatness, and an accuracy of 0.0001" and 0.00005" parallelism on 0 to 1" micrometers provide accurate measurements. Carbide-tipped anvils provide wear resistance and are fitted with an adjusting collar to set the overall dimension. The spindle thread is hardened, ground, and micro-lapped to provide smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The baked-enamel finish provides durability. Each micrometer includes a set of inter­changeable anvils to adjust accurately the micrometer for the required range, a wrench, and a fitted case. SpecificationsDisplay typeVernierAnvil/spindle styleFlatMeasuring range0 to 1"Graduation interval0.0001"Accuracy0.0001"Thimble styleRatchetAnvil/spindle diameter0.256"Flatness0.00003"Parallelism0.00005"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter...

Manufacturer: Starrett Brand: Starrett Model: S167MAHZ

The set includes ranging from 0.5-7mm, 0.5mm Increment, 14 gauges in set. Two slots are provided in the holder permitting gages to be held at 30 degree or 45 degree, either square in the slot or tipped to one side. The holder is 4" (100mm) long, providing good reach and balance. The set is furnished in an attractive case, providing complete protection and easy, instant selection of the right gauge size for the job.

Manufacturer: Flexbar Brand: Flexbar

Heavy-Weight Mag-Based Stands. "Heavy-Weight" Model No. 18048 With Fine Adjustor (indicator not included) Mag Base: 2" H x 21/8" W x 33/4" D, 150 lbs. pull. Total Reach (from bottom of Base): 21". Main Post: 5/8" Diameter x 9" Long. 2nd Post: 1/2" Diameter x 7" Long. 3rd Post: 7/16" Diameter x 55/8" Long. Lug-Back Adaptor included. Model No. 18048, Heavyweight Mag Base With Fine Adjustor. (indicator Not included)