Dimensional Measurement - Page 584

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-406T

Mitutoyo Horizontal Test Indicator Set, Graduations: .0005"/0.01mm, Range: .030"/0.7mm, Dial Face: 0-15-0/0-35-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, holding bar.

Manufacturer: MPositioning Co., Ltd. Brand: MPositioning Co., Ltd. Model: R60A-L

The Precision Manual Rotation Stage combines easy-to-use manual rotation with high precision micrometer adjustment. While the rotary table dial is an unlocked state, smooth rotation can be measured with 1 degs graduation marks. When locked, the dial is adjusted by the precision micrometer head with +/- 5 degs fine rotation. The modular design allows to be set up in X-Rotation, XY-Rotation or XYZ-Rotation configurations by using our standard Manual Positioning Stages, like the model T60X or T60Z series.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Black

The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...

Manufacturer: ASIMETO Brand: ASIMETO Model: 116-03-1

Carbide tipped, Digital Micrometers & Sets, ASIMETO

Manufacturer: Fowler Brand: Fowler

Features Corrosion resistant chrome plated flex arm Holds rigidly in almost any position 40 lb. pull magnet Versatile 70 steel segments work like a contour gage to fit the mag base securely to practically any shape or form Robust, shockproof design Travel: 1 Reading: .001 Continuous reading: 0-100 Tolerance markers AGD Group 2, 2-1/4 dia. Lugback and carbide point Rubber bellows on stem. O-ring seal on safety cap. O-ring protection for bezel and rotating dial Sealed back plate

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

• 5 key Deluxe Model micrometer head • Spherical rod end • High accuracy interchangeable rods • Friction thimble • 4" Base

Manufacturer: Bosch Brand: Bosch Model: GTL3 Color: Blue

This Wall/Floor Covering Laser produces highly visible laser lines lines that are easily seen on work surface and on adjacent surfaces in front of tool. Exclusive switchable 45 degree line helps verify proper positioning of square tiles between 0 and 90 degree. Also features magnetic attachment.Projects 90-lines for squaring - laser lines are positioned in front of laser base for easy centering over point and precise adjustmentBright, highly visible laser linesWater and dustproof to ensure years of dependable operation (certified at IP54)Magnet provides secure attachment on positioning plate and other ferrous-metal surfaces

Manufacturer: Pentair Brand: Pentair

Technical Specification Item Red Line Glass Rod Kit Center to Center Length 26 Glass Tube O.D. 3/4 Glass Length 24 Body Material Borosilicate Glass, Bronze Rod Number of Guard Rods 4 Max. Pressure 400 psi Max. Temp. 300 Degrees F Includes 4 Rods; 1 Glass Tube Standards ASME This listing is for each.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P900-S129

Manufacturer: Flexbar Brand: Flexbar

Premium Quality Precision Dial indicators - AGD 2. Made in Japan Features Extremely Smooth Precision Gears inch and Metric Models. Other Features: Contact Point Made of tool steel, Hardened ground and chrome plated. Stem Made of stainless steel