Dimensional Measurement - Page 594

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 547-520

Mitutoyo 547-520 IDS Digimatic Thickness Gage, Flat Anvil, Deep Throat Type, 0-0.47"/0-12mm Range, 0.0005"/0.01mm Resolution, +/-0.001" Accuracy

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: STDB1M

Ideal for checking calibration and operation of ultrasonic thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Composition - 1018 steel. Certified Step Blocks are supplied with a certificate of calibration showing traceability to NIST/NPL. Composition - 1018 steel. metric units: (2.5, 5, 7.5, 10 and 12.5 mm steps); metric accuracy +/-0.02 mm.

Manufacturer: CME Brand: CME Tools

SATIN CHROME FINISH. MEASURE FROM 100mm TO 1300mm USING A COMBINATION OF EXTENSION RODS. 0.01mm GRADUATION. LOCK SCREW ON THE MIC HEAD.

Manufacturer: Starrett Brand: Starrett Model: T436XRL-7

The Starrett 436 series outside micrometer has a bow-type shape for measurement of large outside dimensions, a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s frame is made of ribbed cast iron with perforations that helps provide light weight with rigidity. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001” depending on the model, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 350-282-30

Mitutoyo 350-282-30 MHN2-25MX(IP65), Micrometer Head, W/ Clamp Nut (M12X0.5), 25 mm, 0.001 mm, IP65.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 64PKA068

Tool kit includes: friction thimble outside micrometer, dial caliper and 6" full flexible rule (3R). Micrometer range: 0-1" and graduation: 0.0001". Dial caliper range: 0-6" and dial graduation: 0.001". Tool kit comes in mahogany case.

Manufacturer: Megger Brand: Megger Model: 280282

The Megger 280282 thickness gauge measures the dry-film thickness of nonmagnetic material, such as paint, plastic, or plating, over an iron or steel base. The stabilized magnet is gravity-compensated and is not affected by temperature or vibration. The magnetic head makes the thickness gauge suitable for use on curved or irregular surfaces. The 280282 is commonly used in painting and plating and in manufacturing in the automotive, alloy casting, and costume jewelry industries. Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Dakota Ultrasonics Brand: Dakota Ultrasonics

The T-102-1000 Dual Element Transducer, 1/4" Diameter, 2.25 MHz is a 1/4" diameter, 2.25 MHz dual element transducer. Potted cable, side in

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-793CAL

The calibrated Mitutoyo 543-793CAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0001" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a lug back for mounting from the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP42 for protection against objects greater than 1mm and dripping water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.0 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0001" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.0N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with lug backData outputYesDimensions103.9...

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Electronic Digital Indicator Series 543 Resolution .0005/0.01mm Accuracy .0008 Range 0.500/12.7mm Long Form Calibration Certificate Yes Features With SPC Data Output Includes Certificate Of Calibration Traceable To NIST, Battery This listing is for each.