Dimensional Measurement - Page 600

Manufacturer: COLE-PARMER Brand: PHASE II

The UTG-1500 is a lightweight ultrasonic thickness gauge designed for versatility and easy-use while being rugged enough to operate in harsh environments. Utilizing the latest in micro computer circuitry, this meter offers a combination of high accuracy and resolution with a quick measurement time over a wide range. The non-destructive piezoelectric transducers are capable of measuring any material - metallic and non-metallic - that sounds waves can travel through, and as long as the object has parallel top and bottom surfaces. What's Included: 5MHz dual-sensor probe, bottle of couplant gel, four AA batteries, and carrying case. Obtain thickness measurements without access to both sides of an object Wide measurement range combined with high resolution and accuracy Adjustable sound velocity range covers the most common materials Lightweight and rugged construction is ideal for lab and field use Easy-to-read 4-digit, 10-mm, LCD

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-903

Set includes micrometers ranging from 2-6", 4 pieces in the set.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-170

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in metric units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm or 0.005mm depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 468-972

The Mitutoyo 468-972 Holtest three-point internal micrometer has a measurement range of 12 to 20 mm, is titanium nitride (TiN)-coated, precise to 0.001 mm, and accurate to + or - 2 micrometers. TiN-coated measuring contact points offer increased durability and impact resistance over uncoated points, and contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. The micrometer has functions for presetting, zero/ABS (Absolute), auto power on/off, data hold, data output, error alarm, and a battery replacement alarm. Estimated battery life is eight months, under normal use. This gage set includes two interchangeable measuring heads, setting ring, extension rod, and fitted wooden case. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, an...

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: PRBF90S-D

Defelsko PosiTector 6000 separate probe. Heavy-duty, gold-plated locking connector for industrial environments. Probe retains its own unique calibration information (allowing full probe interchangeability). Ideal for measuring on small parts, hard-to-reach areas, or close to edges. With our smallest measuring tip and best thin-film Accuracy., this instrument is ideal for measuring on small parts, hard-to-reach areas, or close to edges. Measuring range: 0-45 mils. +/-(0.02 mils + 1 percent) 0-4 mils Then +/-(0.1 mils + 3 percent) accuracy.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-290-520-1

The Brown & Sharpe Micromaster Intrimik Capa LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). An electrostatic capacitance linear encoder helps ensure repeatable, precise measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The co...

Manufacturer: Checkline Brand: Checkline

The MTT-10-300-T Dial Thickness Gauge for Textiles and Non-Wovens with 300 mm Jaw Depth is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generate a specific "pressure" as required by many standardized test standard necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles and similar compressible materials. The instrument does not meet the DIN, EN and ISO standards. The feeler shape and the pressure are corresponding to DIN EN ISO 5084 standards. This low-cost thickness gauge is suitable for quick comparison measurements.

Manufacturer: Checkline Brand: Checkline

Spare / Replacement probes for 6000 Series Coating Thickness Gauges. All probes are supplied with a NIST Traceable calibration certificate.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 468-262

The Mitutoyo Digimatic 468 series Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel and TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, ...

Manufacturer: DeFelsko Brand: DeFelsko

The Spare Probe for PosiTector 6000 F45S Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.