Dimensional Measurement - Page 601

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-178

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement measuring inside dimensions (ID) of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise ID measurements to 0.001”, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 1” per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: CME Tools Brand: CME Tools

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for inside micrometers is an accessory for use with the Brown & Sharpe TESA Alesometer LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Horiba Brand: HORIBA Model: 375152

An economical gloss meter which utilizes a separate detector and light source, offers the ability to switch between 60 degree measuring angle for standard gloss measurement, and 20 degree measuring angle for high-gloss surfaces with gloss values over 70. One touch of the calibration key starts the automatic sequential zero-span calibration. Gloss meters reflect light when exposed to a surface. The intensity of this reflected light is measured as gloss. The IG-331 provides a measured value to confirm visual gloss observations reducing human error. Dimension: Main body: 140 (W) x 75 (H) x 34 (D) mm or 5.5 (W) x 3.0 (H) x 1.3 (D) inches.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 209-572

The Mitutoyo 209 series Digimatic caliper gauges have a combination analog/digital LCD display and large measuring depth for taking outside dimension (OD) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach outside dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring external wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately) for statistical process control (SPC). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the ...

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E4

Three points internal micrometer, 3.5-4", graduation 0002".

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: FT1-E

Defelsko The PosiTector 6000 FT1 includes a standard gage body and a removable built-in FT probe for measuring thick protective coatings on steel substrates. Ideal for thick epoxy, rubber, in tumescent fireproofing and more. Gage body universally accepts all PosiTector 6000 and 200 (coating thickness), SPG (surface profile), DPM (environmental) and UTG (ultrasonic wall thickness) probes. Hi Contrast LCD display: Monochrome. FAST mode - faster measurement speed for quick inspection. Hi-Lo limits audibly and visibly alerts when measurements exceed your specified limits. Statistics - instantly calculate average, standard deviation, min/max thickness and number of readings while measuring. Reading storage capacity: 250 in one group. USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. USB mass storage - stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Two year warranty on gage and probe. The PosiTector 6000 rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly. Ready to measure, no calibration adjustment required for most applications. Enhanced one handed menu navigation. Flashing display, ideal for noisy environment. Reset feature instantly restores factory settings. Solvent, acid, oil, water and dust resistant, weatherproof. Shock-absorbing, protective rubber holster with belt clip. Certificate of Calibration (long form) showing traceability to NIST included. Built-in temperature compensation ensures measurement accuracy. Hi-Res mode increases displayed resolution for use on applications that require greater precision. Conforms to national and international standards including ISO and ASTM. Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero.

Manufacturer: Aven-Miruc Brand: Aven Model: MC-RC-60

These stages have a spherical configuration allowing 180 Degree bending and 360 Degree rotation of the stage plate. It allows for complete flexibility in positioning. The base has a locking mechanism for accurate positioning. These precision stages are made from an aluminum alloy treated with matte black aluminite.

Manufacturer: Vetus Brand: LinShang Color: Grey

Details LS210 Digital Glass thickness meter is mainly used on measuring glass and air space in insulated glass (IG), it also can measure individual panes of glass and the thickness of a glass bottle etc, special for those situations where common ruler cannot easily do it. Parameters: 1. Dimensions: 130mm*70mm*28mm(L*W*H) 2. Weigh: 200g 3. Resolution: +/- 0.2mm 4. Range: Glass Thickness Scale 60mm, Air Space Scale 35mm 5. Power supply: 4 AAA alkaline batteries Feature: 1. Laser reflects on CCD to measure glass thickness and Air thickness 2. Measure Glass & Air Space (insulated glass) quickly from single side of IG Units 3. Accuracy: +/- 0.2mm 4. Large LCD, simple operation, easy reading result value

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: FRS1-E

Defelsko The PosiTector 6000 FRS1 includes a standard gage body and a removable FRS probe for measuring non-magnetic coatings on steel substrates. Ideal for measuring in areas of low headroom. Gage body universally accepts all PosiTector 6000 and 200 (coating thickness), SPG (surface profile), DPM (environmental) and UTG (ultrasonic wall thickness) probes. Hi Contrast LCD display: Monochrome. FAST mode - faster measurement speed for quick inspection. Hi-Lo limits audibly and visibly alerts when measurements exceed your specified limits. Statistics - instantly calculate average, standard deviation, min/max thickness and number of readings while measuring. Reading storage capacity: 250 in one group. USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. USB mass storage - stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Two year warranty on gage and probe. The PosiTector 6000 rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly. Ready to measure, no calibration adjustment required for most applications. Enhanced one handed menu navigation. Flashing display, ideal for noisy environment. Reset feature instantly restores factory settings. Solvent, acid, oil, water and dust resistant, weatherproof. Shock-absorbing, protective rubber holster with belt clip. Certificate of Calibration (long form) showing traceability to NIST included. Built-in temperature compensation ensures measurement accuracy. Hi-Res mode increases displayed resolution for use on applications that require greater precision. Conforms to national and international standards including ISO and ASTM. Multiple Calibration adjustment options including 1 point, 2 point, known thickness, average zero. Hi Contrast backlit display for bright or dark environments.