Dimensional Measurement - Page 674

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2805SB-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's NPTF Tapered Pipe Plug Gages are used to check tapered internal pipe threads. Perfect for inspecting standard pipe and pipe fittings.

Manufacturer: Fowler Brand: Fowler

12-Piece Angle Block Set Includes: Blocks: 1/4 , 1/2 , 1 , 2 , 3 , 4 , 5 , 10 , 15 , 20 , 25 and 30 Shop Hardened case Features Precision ground hardened steel Angular accuracy : 30 arc seconds Set up angles quickly and easily All blocks 3 long x .25 thick

Manufacturer: Starrett Brand: Starrett Model: T663L

The Starrett 663 series heavy-duty micrometer head has a wide-diameter spindle, stem, and thimble for heavy-duty use, and a vernier scale in inch units for taking precise measurements to 1”. It also has a knurled ring-type lock nut to hold measurements in place. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001” or 0.0001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: AC21-5022

4-5'' x 0.00005'' Electronic Digital Micrometer 7 Keys, #AC21-4022 Measuring Range: 100-125 mm/ 4 - 5'' Large Display Auto On and Off capabilities Resolution: 0.001 mm or 0.00005 inches Absolute, floating zero, and relative measurements (you can zero out at any point) Location Memory (no need to re-zero with each use!) Hold button, Tolerance Mode, Relative and Absolute Modes, and Pre-settable Origin Instant inch/millimeter conversion Switch between metric and imperial measurements with great ease Comes with carrying case and 1 battery Battery used is button cell LR44 or SR44 (1.5V)

Manufacturer: Fowler Brand: Fowler

Features Ball anvil/flat spindle for measuring tubes or the insides of holes to outer edges Protected to IP54 specifications Large LCD display, 8.5mm Automatic switch off Hardened steel measuring face Absolute /25mm include standard

Manufacturer: Starrett Brand: Starrett Model: V1463MRL

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4303950

Mahr Federal 801 H MarTest 4303250, 0.0005" x ±0.015" Horizontal Test Indicator, 0-15-0, 1.1" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: iGaging Brand: iGaging Model: 35-070-050

IGaging 1-2" Digital Quick Micrometer Absolute Origin SpeedMic Snap Lever Action GageiGaging Absolute Origin SpeedMic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position.Quickly measure with super high precisionLever activated - Fully Opens and Closes In Less Than One Second!linear moving sensor provides accurate and reliable measurementsIP65 coolant proofMeasuring Range: 1-2"/25-50mmCarbide tipped spindleResolution: 0.00005"/0.001mmAccuracy: ±0.00015"/0.003mmFixed Thimble.SPC/USB data output available (not included) Search Amazon for item: B00INL0BA2.Ball Attachment Included.Case included2 Years warranty.

Manufacturer: iGaging Brand: iGaging Model: 35-070-050

IGaging 1-2" Digital Quick Micrometer Absolute Origin SpeedMic Snap Lever Action GageiGaging Absolute Origin SpeedMic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position.Quickly measure with super high precisionLever activated - Fully Opens and Closes In Less Than One Second!linear moving sensor provides accurate and reliable measurementsIP65 coolant proofMeasuring Range: 1-2"/25-50mmCarbide tipped spindleResolution: 0.00005"/0.001mmAccuracy: ±0.00015"/0.003mmFixed Thimble.SPC/USB data output available (not included) Search Amazon for item: B00INL0BA2.Ball Attachment Included.Case included2 Years warranty.