Dimensional Measurement - Page 678

Manufacturer: Meda - Superior Import Brand: Meda - Superior Import

Amply proportioned measuring beams and bases for extra rigidity. • Satin - chrome Finish • Double Spaced Vernier • Vernier Scale : 1/1000" x 1/50mm • Magnifying Glass • Fitted Case Sliding scale permitting all measurement to start from an even reference point.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.

Manufacturer: Newtry Brand: Newtry®

Usually the product should take about 6--13 business days to arrive your hand after your payment is confirmed Major performances Type C: applicable to the hardness test of rubber microporous material. Type C applies to the testing of microporous material which is used to make shoes, with compression rate 50 percent, stress 0.049 MPa or above, and this kind of material is made of rubber plastic and has blister in plastic. This hardness gauge conforms to the regulations of GB/T531-99, GB2411-80, hg/t2489-93, JJG304-2003 Technical Parameter Types:Type C Calibration Value:0-100 HC Resolution:1 HC Pressure Head Size:SR2.5 mm End pressure of Pressure Head:0.55 N-8.06 N Pressure Needle Range:0-2.5 mm Apparatus Weight:0.3 Kg Attention:  we will send the product to you as soon as possible  If you have any questions , please feel free to contact us 

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: Gel_P

Ultrasonic gel couplant. 4 ounce capacity.

Manufacturer: Fowler Brand: Fowler

Fowler Support FInter Plate 53-190-028

Manufacturer: Ohaus Brand: Ohaus

Accurate and dependable, the original OHAUS Triple Beam balance has been the standard in science classrooms for decades.  Whether you’re weighing solids, liquids, powders or even animals, an OHAUS Triple Beam balance is well equipped to handle the job.  These balances offer the accuracy and convenience of a toploading balance while allowing students to gain hands-on experience through manipulation of the poises and attachment weights (sold separately), as well as to visualize mass measurement principles. The 700 Series accommodates a range of laboratory and education applications. Some models have a tare beam to allow containers up to 225g to be balanced out, and a variety of weighing platforms are also available. The OHAUS Dial-O-Gram® Series combines the convenience of direct-reading dial calibration with the speed of magnetic damping for a balance that accurately and quickly weighs everything.

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of M82 x 2 thread plug gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: Starrett Brand: Starrett Model: 796XRL-1

The Starrett 795XRL series LCD outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. The micrometer has an Ingress Protection 67 (IP67) rating, which means that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes.The micrometer’s electronic microprocessor can preset, hold, or limit measurement at any position, as well as set a temporary zero position and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. Depending on the model, it may have Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s frame has a black wrinkle finish that helps resist rust and reduce glare. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The vernier scale on the thimble and sleeve has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single CR2032 lithium cell battery. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are ty...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Material hardness full-metal dial casing. Stainless steel fixing shank and plunger, hardened. Adjustable tole - rance marks. M2,5 mounting thread for the measuring insert. Included in scope of supply: mounted insert with a 3mm diameter steel ball tip. Comes in cardboard box. Identification number. Inspection report with a declaration of conformity. Dial locking knob. 0.5" Revolution.

Manufacturer: Starrett Brand: Starrett Model: 208Z

The Starrett 208 series can seam micrometer has a vernier scale in inch units for taking measurements of the width, height and depth of can seams. The micrometer is made of stainless steel for durability, with a satin chrome rust- and glare-resistant finish, and a knurled sleeve that helps provide a secure grip. The vernier scale on the thimble and sleeve is graduated to 0.001” for taking precise outside diameter (OD) measurements. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.