Dimensional Measurement - Page 679

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-349

The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution 0.00005” (0.001mm), and a ratchet thimble mechanism that helps provide precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. On some models, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headq...

Manufacturer: Flexbar Brand: Flexbar

Digital-Dial Height Gages combine a Large .100" Revolution Dial indicator With a Dual Digital Counter for Fast and Easy, Error-Free Reading. Main Features: Double Digital counter for convenient up and down Readings in .100" increments. Two independent floating Zero adjustment buttons. 2 3/16" Dia. Dial With Wide spread .001" Graduation,100" per revolution. Continuous Dial With secondary numbers for reverse Reading. Large feed wheel for fast course movement and Fine adjustment. Positive carriage lock. Cylindrical Dual beam construction for maximum stability. Wear Resistant chrome plated beams. Heavy Base With Hardened, ground and lapped bottom surface. Carbide Tipped off-Set scriber to cover entire Range from bottom surface. Scriber Clamp also accepts 1/4" Rectangular indicator Holder. (Model No. 12937) Furnished in molded styrofoam shipPing container. 12", 18" and 24" Models Available - .001" Reading Model No. 18265, Digital-Dial Height Gage 0-12" Range

Manufacturer: Linsen Tool Co.,LTD Brand: Linsen

Each set of Metric thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 7304SCAL

The calibrated Mitutoyo 7304SCAL dial thickness gauge is for measuring the thickness of workpieces. This gauge has a measurement range of 0 to 1.0", a resolution of 0.001", and an accuracy of + or - 0.002". The dial indicator face is white for precise and readable measurements in inches. The anvil is flat and the contact point and anvil are ceramic for corrosion-resistance. This model has a grip handle, thumb trigger, and spring-loaded spindle for accurate measurements. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This gauge has a measuring force of 2.0 Newtons (N) or less.SpecificationsAnvil/spindle typeFlat, spring-loaded spindle, ceramicRange0 to 1.0"Graduations0.001"Accuracy+ or - 0.002"FaceDial with white face displays in inchesBodyStandard type, grip handle, and thumb triggerMeasuring forceLess than 2.0NShipping weight0.8lb.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.What's in the Box?Mitutoyo 7304SCAL gaugeCertificate of Calibration

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-1-34

The Brown & Sharpe enamel frame outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with conventional straight markings, and has a satin chrome rust- and glare-resistant finish. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.< /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2312-5010

Manufacturer: INSIZE Brand: INSIZE Model: 3229-18

Tubular inside micrometer, 17-18", graduation 001".

Manufacturer: Starrett Brand: Starrett Model: 765A

High quality, economical gauge that is ideal for inspectors, purchasing agents, sales people and other who need to quickly measure materials up to 1/2" thick.

Manufacturer: OMEX Brand: OMEX

Indoor range 0.05- 80 Meters. units- m,ft,in. Accuracy +/-1mm. ISO 16331-1. The compact and handy entry-level model has many interesting functions and is still simple to use. Addition and subtraction, area and volume calculations for rapid and reliable site measurement. Special painter function. The last 10 results are stored.Leica DISTO D210 - leave the measuring tape behind.Power Range Technology. IP54 dust and water splash protection . Illuminated 3-line display. Automatic multifunctional end-piece.Batteries type AAA 2 x 1,5 V. FEEL FREE TO ASK ANY QUESTION ? HAPPY TO COMBINE POSTAGE ON MULTIPLE ITEMS.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-401-206-0

The Fowler 52-401 series outside micrometer has a choice of measuring range and flat anvil/spindle pairs with interchangeable anvils to provide a wide measuring range. The digit scale has 0.0001" graduations and an accuracy of 0.0003" on 0 to 6" micrometers or 0.0004" on 6 to 12" micrometers. Carbide-tipped anvils provide wear resistance and are fitted with an adjusting collar to set the overall dimension. The spindle thread is hardened, ground, and micro-lapped to provide smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated steel frame helps reduce temperature-related expansion or contraction providing accurate measurements. Each micrometer includes a set of inter­changeable anvils to adjust accurately the micrometer for the required range, a wrench, and a fitted case. SpecificationsDisplay typeDigit displayAnvil/spindle styleFlatMeasuring rangeVariesGraduation interval0.0001"Accuracy0.0003" for 0 to 6" micrometers, 0.0004" for 6 to 12" micrometersThimble styleFrictionMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred...