|
|
-
4.4 of 5.0 with 48 Reviews
SALE PRICE: $228.97 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 112-165
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 112-165
|
The Mitutoyo 112 series point micrometer has a pointed spindle and blade anvil for measuring grooves and keyways, a vernier scale in metric units graduated to 0.01mm for taking precise outside diameter (OD) measurements and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The spindle and anvil are made of hardened steel for durability. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.4 of 5.0 with 50 Reviews
SALE PRICE: $229.00 8% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 709AZ
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 709AZ
Color: White
|
The Starrett dial test indicator without attachments has a Red, black, or white face, and inch measurements. It has a narrow body for use in hard-to-reach areas, and has a choice of red, white, or black dial face for use in a variety of lighting settings. The carbide ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation with automatic reversal helps prevent plus or minus confusion. The ball-bearing lever system with measuring insert swivels through to 210 degrees. The dial has an angled face and three dovetail mounts, and can be mounted horizontally or vertically from the front, top, or back of the indicator. The indicator has a satin chrome finish for durability, and a gear-driven, jeweled movement for accuracy. The contact points are frictionally adjustable and replaceable. This dial test indicator meets or exceeds accuracy and performance requirements of national and international standards, and is traceable to the United States National Institutes of Standards and Technology (NIST). Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of...
-
4.4 of 5.0 with 28 Reviews
SALE PRICE: $229.00 1% OFF
Manufacturer: Stabila
Brand: Stabila
Model: 38532
Color: Yellow
Manufacturer: Stabila
Brand: Stabila
Model: 38532
Color: Yellow
|
Stabila 38532 Specifications: Type: 96M Length: 32" & 78"Stabila 38532 Includes: (1) 32" Magnetic Level without hand holes (1) 78" Magnetic Level with Hand HolesStabila 38532 Features: Strongest Magnets, flush mounted - Work Hands-Free. Spring steel hairline indicators inside the vials. Certified Level Accuracy in top read position: 1/32" over 72". Levels 59" and longer have a bridge over the horizontal vial for uninterrupted scribing and increased frame strength. Patented, epoxy-locked vials never need adjusting. Removable rubber end caps for flush measuring in corners. Patented red pads on end caps grip walls & flat surfaces. Prevents slipping on walls. Level accuracy guaranteed for life; vials will never fog, leak or require adjustment. Readable in every direction with no change in accuracy tolerance. Bent levels void manufacturer warranty The Stabila Magnetic Jamber Level Set gives you a 78-inch level and a 32-inch level, providing you with a versatile and professional-grade tool combo ideal for setting door frames, headers, sills and thresholds. These levels include flush-mounted, rare earth magnets 10 times stronger than standard magnets which allow you to work hands-free as the level powerfully clings to metal studs, beams and pipes. These levels feature a wider profile for added strength in the box beam frame, and the 78-inch level includes a bridge over the horizontal vial for uninterrupted scribing and increased frame strength. These levels include rubber end-caps and anti-slip wall pads that grip surfaces for added level stability; the end-caps can also be removed for flush measuring when scribing corners or reading tight header and sill openings. With a permanently calibrated, epoxy-locked, crystal-clear design and internal spring steel hairline indicators, these acrylic vials are readable in any direction and have a certified level accuracy of .029 degrees (1/32-inch over 72-inch) in top read position. The longer level comes with 3 vials (1 horizontal and 2 vertical) and the shorter level has 2 vials...
-
4.4 of 5.0 with 32 Reviews
SALE PRICE: $229.83 6% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 511-346
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 511-346
Mitutoyo offers a complete selection of Bore Gages, all of them with interchangeable anvils and necessary accessories to perform close tolerance ID measurements. Mitutoyo offers a complete selection of Bore Gages, all of them with interchangeable anvils and necessary accessories to perform close tolerance ID measurements.
-
4.4 of 5.0 with 27 Reviews
SALE PRICE: $230.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 147-351
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 147-351
|
The Mitutoyo 147 series hub micrometer has a shallow-throated frame for measuring hub thickness and shoulders inside a bore, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer has a baked enamel finish for protection and durability of frame. The vernier scale on the thimble and sleeve is graduated to 0.001â€, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.4 of 5.0 with 30 Reviews
SALE PRICE: $232.47 13% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 110-107
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 110-107
|
The Mitutoyo 110 series micrometer head has a differential screw movement and a vernier scale in metric units for taking precise, high-resolution measurements with a spindle travel of 0.05mm per revolution for extra-fine adjustment. It has a clamp-nut stem for quick mounting of the micrometer in a fixture. The vernier scale is graduated to 0.001mm, 0.005mm, or 0.0001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The spherical measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.4 of 5.0 with 16 Reviews
SALE PRICE: $233.80
Manufacturer: Fowler
Brand: Fowler
Model: X Class
Manufacturer: Fowler
Brand: Fowler
Model: X Class
Features X Class Used for accurate setting of internal measuring instruments Made from oil-hardened, non-shrinking gage steel, hardened and tempered to Rockwell 62C Subzero treated at minus 80 C for dimensional stability Actual size etched on each master ring
-
4.4 of 5.0 with 46 Reviews
SALE PRICE: $236.69 6% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 57D
Manufacturer: Starrett
Brand: Starrett
Model: 57D
57D Full-Sized Surface Gages- 12"/18" Spindle
-
4.4 of 5.0 with 2 Reviews
SALE PRICE: $237.65 3% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 216P-1
Manufacturer: Starrett
Brand: Starrett
Model: 216P-1
Starrett Micrometer Part # 55952 216P-1 This is the Starrett mechanical digital micrometer very simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). Headquartered in Athol, MA, in the heart of New England, where manufacturing began and evolved into what it is today, Starrett has a history and reputation so rich and solid that the words quality and Starrett are virtually synonymous. The broad Starrett product line includes precision tools micrometers, calipers, rules, tape measures, levels, electronic gages, dial indicators, gage blocks, granite surface plates, optical measuring projectors, vision systems, vises, M1 lubricant, and precision ground flat stock. Much of the Companys production is concentrated in hand measuring tools and precision instruments that many manufacturing companies, from small machine shops to Fortune 500 firms, buy for the use of their employees.
-
4.4 of 5.0 with 24 Reviews
SALE PRICE: $239.34 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-186-30
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 293-186-30
Micrometer, Digimatic, 1-2", IP65, .00005", no SPC
|
|