Dimensional Measurement - Page 693

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-174

The Mitutoyo 368 series Holtest vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a vernier scale in metric units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm or 0.005mm depending on the model. The measuring faces are carbide-tipped or TiN-coated for wear resistance depending on the model. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe

Manufacturer: Starrett Brand: Starrett Model: 128M

The starrett combination head for inside micrometers combines the precision of a dial indicator sensor and the linear accuracy of a micrometer. This combination of indicator and micrometer reduces the need for operator "feel" and provides faster readings with increased reliability. For millimeter-reading tools, the head can be adjusted within a range of 50mm. This extends the overall range an additional 125mm. The special no. 81-181J jeweled non-shock Indicator is graduated 0.01mm, range +/- 1mm and reads 0-100mm on both the plus and minus dials. The 250mm master should be used vertically with the shoulder on the indicator end of the head, seated squarely.

Manufacturer: Checkline Brand: Checkline

The DFT Coating Thickness Gage measures the thickness of coatings on ALL metals. Accurate and economical the DFT is the ideal instrument for Powder Coaters, Paint Applicators, Coating Inspectors... Easy-to-read oversized LCD display is reversible for reading when inverted. Features Includes NIST Traceable Calibration Cert No calibration required for most applications Strong, wear resistant, ruby-tipped probe V-groove in probe for positioning on cylindrical parts Basic instructions on the back of each gauge ZERO feature for rough or curved surfaces Handy RESET feature when no zero reference is available Audible and visible measurement indication Mils/Microns switchable 2-Year Warranty     [custom1] Measuring Range 0 - 40 mils ( 0 - 1000 µm) Accuracy ±(0.1 mils + 3%) (±(2µm + 3%)) Size 4 x 1.5 x 0.9 in (100x38x23 mm) Weight 2.5 oz (70 g) [/custom1]

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-281-32

Style A refer to through hole

Manufacturer: CME Tools Brand: CME Tools

PERMANENT MAGNETIC CHUCKS FINE POLE HIGH POWER THIS CHUCK HAS POLES OF 1/8" MAGNETIC STEEL AND 1/8" NON MAGNETIC STEEL. THE TOP PLATE IS FURNACE BRAZED. MAKE A SOLID ONE PIECE UNIT. IT CAN BE DRILLED OR MACHINED TO A DEPTH EQUAL TO THICKNESS OF THE TOP PLATE MINUS 1/8". SIZE: 8"X24" HEIGHT: 2-3/4" WT:118 LBS

Manufacturer: Tlegend Instrument® Brand: Tlegend Instrument Model: 335-12-920

b>The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description Measurement can be taken closer to the bottom Measurement can be taken closer to the bottom hole with an extension rod Highly durable because of carbide-tipped contact points Ratchet stop Technical Datas Protection level IP54. Type.75-88mm*0.001mm   Accuracy: 0.005mm NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-174

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise inside dimension (ID) measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 25mm per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Checkline Brand: Checkline Model: TI-25LT

Economical steel only model   Features   Includes NIST-Traceable Calibration Certificate Resolution of 0.004 inch (0.01 mm) Large, backlit LCD display retains last reading Simple operator controls virtually eliminate training Special-purpose probes are offered for a variety of applications The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally The TI-25LT probe is waterproof and can be submerged in water CE Certified Made in the USA with 5-Year Warranty IP 65 Rated  [custom1]   Range in Steel 0.040-6.00" (1.00-150.0 mm) Resolution .004" (0.01mm) Display 4½ - Digit, 0.5" Backlit LCD Velocity Range .0787-.3937 in/µs (2000-10,000 m/sec) Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm) Probe Wearface PEEK (Polyethylethylkytone) Cable 4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op Temp. Limits Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available Battery Type Two AA batteries Battery Life 200 hours Weight 710 ounces (280g) Dimensions 2.5 x 4..5 x 1.25" (64 x 114 x 32mm) Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. Warranty Gauge: 5 Years Probes: 90 Days [/custom1]

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-995

The Mitutoyo 368-995 Holtest Type II three-point internal micrometer set has alloyed-steel points, a measurement range of 0.5 to 0.8”, and is precise to 0.0002”, with + or - 0.0001” of accuracy. Alloyed-steel measuring contact points offer durability, while contact point geometry allows the instrument to measure to the bottom of a blind hole. The ratchet stop offers constant force for repeatability. Includes inspection certificate ensuring that the exact micrometer purchased has met National Institute of Standards and Technology master standards. This gage set includes two complete display units, setting ring, extension rod, and a fitted plastic case. Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL. What’s in the Box? Mitutoyo 368 series 0.5 to 0.65” three-point internal micrometer Mitutoyo...