Dimensional Measurement - Page 713

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-115-004-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Cooper Hand Tools Brand: Lufkin Model: X48N

Slide Rule runs under friction in T-Slot. Stops at each end to prevents slide from falling out. Marked both sides and both edges.

Manufacturer: Keson Brand: Keson Model: ST18M100Y

Keson closed case steel blade tape with hook end it is great for those who need a longer tape but like the blade protection that a closed house offers. They slip easily into a pocket, purse, tool pouch or tool belt. Come with a belt clip. Ideal for real estate agents, general surveying, civil engineering, building construction, highway and road construction, home building, mining, etc. Specification: length: 100 ft/30M; units: ft, in, 1/8 & M, cm, 2mm; zero point hook end; double hook attachment; blade: G1 & G3.

Manufacturer: eMeasure Brand: eTape16 Model: ET16.75-DB-RP Color: Red

The tape measure has remained virtually unchanged for over 100 years until now. The eTape16 digital tape measure revolutionizes not only the tape measure but also expands its utility as never before envisioned. The large digital display provides easy reading while the advance features are readily accessible. These features include 3 memories, US or metric units, centerline calculation, re-zero and Inside/Outside measurements. In addition to its advanced features, the eTape16 incorporates a sleek modern design. Made of poly carbonate plastic, the eTape16 is made to last in the most rugged of environments.

Manufacturer: TC Brand: TC

100% brand new and high quality Precision measuring instrument for delicate items - essential tool for jewelers Precision sliding gague measures up to 6" (150mm) in increments of 1/16" (1mm) Scale marked in Centimeter Vernier Design will measure inside and outside of object Ultra precision and effortless operation Specification: Material: Plastic Overall Length: 20.9 cm / 8.23" (Approx.) Width:7.2 cm / 2.83" (Approx.)

Manufacturer: Adafruit Brand: Adafruit

Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors. Inside are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. The third is a 3-axis gyroscope that can measure spin and twist. By combining this data you can REALLY orient yourself. When Adafruit saw the new LSM9DS0 from ST micro we thought - wow this could really make some wearables super smart. Design your own activity or motion tracker with all the data! The sensor has a digital (I2C) interface. Attaching it to the FLORA is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can only connect one of these sensors to your FLORA, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side. This sensor uses the same Arduino library as our conventional form LSM9DS0 breakout.

Manufacturer: ezMachineTools Brand: ezMachineTools

This M0 Minus type plug pin gage set contains 50 pieces. They are of size 0.011 inch to 0.060 inch and 2 inch in length. The tolerance is -0.002 inch.

Manufacturer: Hatori Brand: Hatori Color: Silver

Manufactured using high carbon steel and high quality chrome vanadium steel for strength, durability and resistance to corrosion. These tools feature ID stamping showing size and brand. Product Features: This 26-Blade Master Feeler Gauge measures .0015-inch (.038mm) to .025-inch (.635mm). Each hardened, tempered steel blade is laser etched with inches and millimeters. The blade protector has a thumb-notch to aid in the removal of the blades.

Manufacturer: A.P.T Ltd Brand: A.P.T

USE OUR TESTER TO CHECK: Is your lacquer original? How many layers of lacquer. Which elements were replaced or lacquered. Which elements were "dressed", straightened and then filled. The thickness of the trowel. Are they telling you the truth. _____________ WHAT DO THE PARTICULAR COLOURS MEAN: - layer thickness up to 70 um - thin lacquer layer. (the lacquer is laid without a ground coat, polished.) - layer thickness up to 100 - 200 um - for original lacquers. - layer thickness up to 200 - 300 um - after lacquer repairs (second lacquer) - layer thickness up to 300 - 520 um - surfaces after tinsmith repairs (a trowel+2 lacquers) - layer thickness up to 520 - 750 um - surfaces after filling and lacquering. (trowel amount around 0,5 mm) ________________ THE MOST OFTEN LUTED PLACES ARE: 1. The edges of mudguards and doors. 2. Pit bottoms - front and back. 3. The roof above doors and windows. 4. Headlight areas. 5. The edges of bonnets and boots. 6. The areas by bumpers. 7. Bonnet floors. 8. The spots where bumpers and shock absorbers are fixed. _______________ 1.The scale in the microns (the tester is the meter!!!) 2.Color scale (it makes the measure easier - one does not have to look for a car with an original lacquer or an original place, as it is possible that there is no such place) 3.It has a globular magnetic tip (it levels the partly not perpendicular appliance of the tester to the tested surface) 4.Hermetic plug (the tester does not get dirty and catch iron filings) 5.The measuring precision is from 20 to 25 microns (the test should be conducted according to the instruction manual)

Manufacturer: OdontoMed2011® Brand: ODONTOMED Model: 2016 Color: SILVER

OdontoMed2011® BRACKET HEIGHT GAUGE 3.5MM-5MM 018 ALUMINIUM DENTAL GAUGE .. ALUMINIUM HIGH QUALITY !!! OdontoMed2011® Instruments